139 Results for "Reverse Engineering Blood Glucose Monitors"

Mobile temperature controlled soldering iron
Instructions from Mobile temperature controlled soldering iron
It's time to do the back panel ! I provided several options for powering by putting a standard DC plug, banana plugs and additional an XT60 plug for powering with a LIPO battery (which I have plenty for model flying).Since it is possible to reverse polarity...

Thor
Instructions from Thor
Assembly it!To be able to watch in detail the assembly on FreeCAD follow this steps:Go to the ExplodedAssembly Workbench GitHub Repo.Follow the instructions to install it in your system.Start FreeCAD.Open an Assembly file (located on Thor>freecad-src>animation).Select...

Identify your printhead
Instructions from Repairing (?) A Canon i9900 Printhead
There are two compatible printheads for this printer. One (the original) is the QQY6-0055, and the other (a later replacement) is the QY6-0076. To my knowledge, there are NO OTHER PRINTHEADS that are compatible with this printer.The model of your...

Put together the exterior hexagon
Instructions from NeoPixel Hexagon Backpack
Put 1 magnet in each of the 4 corners of the Hexagon BaseVerify the polarity will match with the internal assemblyPlace the Hexagon Faceplate into the slots provided (make sure the 2 nubs are pointing towards the magnets, for convenience of locating...

We Are Done!
Instructions from How to Convert a Hoverboard Into an Electric Kart
Some tips on usage: Calibrate the pedals limits: long press of the Power button (> 5 sec) to enter the auto-calibration of the ADC limits. Move the pedals to its limits. Once finished press the power button to confirm or wait 20 sec for the timeout....

Electronics/Finishing - Step 4
Instructions from MiniHawk VTOL
At this point, configure the Flight Controller with any specific firmware or settings relevant to controlling a Tricopter VTOL Fixed-Wing vehicle, if not already. Attach the servo and ESC headers to their required pins. Install the R/C receiver and connect...

Prepare the Schottky Diode
Instructions from DIY Mini UPS for WiFi Router
In this project, we will use two Schottky diodes to prevent reverse current flow. You can also use general-purpose diodes but the main reason for using the Schottky diode is that they have a lower forward voltage drop then the general purpose diode....

Testing in PC Games
Instructions from Arduino Game Controller For PC and Android
You can use this controller to any games that support joystick . By changing the controllerWorks well in euro truck simulatorFor This Tutorial I am Going to use Euro Truck Simulator for test 1) Go To Options > Control > Change (Keyboard to Keyboard...

Identifying components
Instructions from Bypassing the valves on a Korg EMX-1 / ESX-1
With the PCBs seperated. You need to unscrew the main PCB and identify two resistors: R54 and R62. Similarly, identify two capacitors: C43 and C50 - they are next to each other. See the pictures for details. Now, it is essential to identify these...

Making the Central Display
Instructions from The Levels of Hell: Dante's Inferno 2.0
Hire Jeremy to do the artwork for you. Then set up the illustrations in Illustrator for printing & routing. Print the graphics in reverse using a Mimaki onto 1/8" clear polycarbonate: After printing the transparent colors, print a white backer. ...

Saving Power
Instructions from LoRaWAN Birdhouse
Power consumption of the hardware is at about 2-4 µA in idle sleep mode. To get there you have to cut the PCB trace for the power LED of the Grasshopper (please see the zip files). And you also have to remove pull-up R5 on the HX711 SparkFun board....

Laserworks
Instructions from Laserworks
This should be straight forward for the test setup.Place AVR on breadboard. Connect your programmer correctly.Connect some LED's and ofcourse power.Write some code (see code on the left)Look up the fuses at e.g. http://www.engbedded.com/fusecalc/Get...

Configuring the Pixhawk to Correctly Run the Motors
Instructions from Project Albatross
Once the ASV was built, the next main step was to configure the Pixhawk for our application. As the Pixhawk would be autonomously controlling the ASV, it would act as a Rover styled robot. Therefore, we downloaded ArduRover firmware to the Pixhawk and...

Sketch #2 - Analog Stick and Digital Buttons (L2 and R2)
Instructions from Arduino Robot With PS2 (PlayStation 2) Controller
At a given time, all consoles adopted joysticks with two analog sticks. Those new inputs allowed force sensitive inputs that created variable speed actions and became popular in every kind of video games. In this second example I wanted to use an analog...

Installing the UV Light System
Instructions from Ultraviolet Microwave (name subject to change)
There was a convenient and well-done schematic on top of the chamber inside the microwave. Unfortunately it doesn’t actually represent the way the microwave was wired up. I had to reverse engineer a bit of it to figure out how to wire it. If you use...

|<
<
2
3
4
5
6
>
>|