Close

218 Results for "%E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8%E3%81%A3 %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9conspicuous%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8%EC%85%94%EC%B8%A0%EB%A3%B8solid %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9%E2%94%82%C3%86%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0derivative"

  • Crazy Clock
  • Instructions     from Crazy Clock
  • Locate a spare out-of-the-way spot inside the movement that can accommodate the board. For the Quartex Q-80 movement, the best place is between the latch and the sub-assembly on the side opposite where the coil and battery terminals are.If the board...

  • All to do with table saws
  • Instructions     from All to do with table saws
  • The jimmy jig/ used 1/2in ply cover with laminate both sides, hardwood telescoped rails, or 20/80 aluminium extrusions and a clamp that forces the jig rails against the frame that surrounds the table saw/ rock solid, the fence will never deviate from...

  • Unix on your breadboard
  • Instructions     from Unix on your breadboard
  • Connect USB cable to Fubarino and to your computer. Fubarino console will appear as a virtual COM port on your computer. Use any terminal emulation program (like putty on Windows or minicom on Linux) to connect to this virtual COM port at baud rate 115200....

  • ESP8266 Useless Throwie
  • Instructions     from ESP8266 Useless Throwie
  • Detailed instructions on the GitHub project page.TL;DR versionCheckout and install node packages.$ git clone git@github.com:mcauser/esp8266-useless-throwie.git $ npm install -g grunt-cli $ npm installView web version. Grunt will automatically open your...

  • Purchase your fans
  • Instructions     from PC 140mm Air Filter
  • Head out to DigiKey and find some fans you like.  Here is a query to get you started. 12V4-pinTube axialStatic Pressure at or above 0.5 inches of H20Sizes (square) 70mm80mm92mm92.5mm119mm120mm NOTE:  The GitHub repository only includes OpenSCAD...

  • LED module
  • Instructions     from Programmable Light Controller
  • After uploading firmware, the only remaining task is to connect the LED module into the controller. Before soldering 7W LED module, fix it to the provided heatsink. To improve thermal transfer make sure to apply thermal grease between the LED module...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday