Close

962 Results for "%EC%84%A0%EB%A6%89%EC%9C%A0%ED%9D%A5%E3%80%8Eoio_%EF%BC%94%EF%BC%96%EF%BC%94%EF%BC%98_%EF%BC%90%EF%BC%99%EF%BC%93%EF%BC%90%E3%80%8F%C2%B1%EA%B0%95%EB%82%A8%EB%A3%B8%3C %EC%84%A0%EB%A6%89%EB%9E%80%EC%A0%9C%EB%A6%AC %E2%88%80%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8 %E2%88%81%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8 %E2%88%86%EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5%2B %EC%84%A0%EB%A6%89%EB%A3%B8%EC%8B%B8%EB%A1%B1%3E %EA%B0%95%EB%82%A8%EB%9E%80%EC%A0%9C%EB%A6%AC%E2%88%88 %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8 %E2%88%82%EA%B0%95%EB%82%A8%EB%A3%B8%EC%8B%B8%EB%A1%B1 enough"

  • Honeybee Hive Monitoring
  • Instructions     from Honeybee Hive Monitoring
  • Add the HX711 sensor board to the Apitronics Bee.Connect the 4 wires from the scale to the 9-pin plug that passes through the weatherproof enclosure. These wires should be connected on the inside of the enclosure to E-, E+ (for excitation + and -) and...

  • Clone of stEve
  • Instructions     from Clone of stEve
  • Breadboard circuit- The light follower circuit for the workshop is made up of two LDRs in voltage dividers with 22kOhm resistors (VCC - LDR - {signal to A0} - Resistor - Ground), (VCC - LDR - {signal to A1} - Resistor - Ground).- Additionally we supply...

  • 68000 Processor
  • Instructions     from Nomad
  • Plug in the 68000 processor and minimal glue logic. To test if you build this part of the circuit correctly, add 10k pulldown resistors on all 15 data lines of the processor.  Power on the board, and verify with an oscilloscope that A0 operates...

  • Assembly Steps
  • Instructions     from Arduino Joystick Mouse
  • Print enclosure and file down inner tracks so that the joystick PCB slides in easily De-solder pins from joystick breakout board Use wires to make the following solder connections: Solder GND on Joystick to GND on Arduino Solder 5V on Joystick to VCC...

  • thingSoC I2C Hub
  • Instructions     from thingSoC I2C Hub
  • The default address for the I2C hub is 0x74 with A2 shorted, and A1 and A0 Open.0 = Shorted, 1 = Open (ie. inverted...)A2 A1 A0 - I2C Address1 1 1 - 0x701 1 0 - 0x711 0 1 - 0x721 0 0 - 0x730 1 1 - 0x74 (Default I2C Address as shipped)0 1 0 - 0x750 0...

  • Infinity Mirror Clock
  • Instructions     from Infinity Mirror Clock
  • System Design:The circuit is very simple: LED Strip - Connect power to the LM2596 Step Down Adjustable Power Supply Module - ensure you adjust the pot so that the output is 5V; Connect the ground to the common ground; Connect data to pin D5 of the ArduinoTouch...

  • Free run (optional)
  • Instructions     from 68020 minimal homebrew computer
  • Although optional, it is highly recommended to test the board so far with the free run test. Connecting the databus to the ground, the CPU will read in 0x0000.0000 as an instruction and will execute a kind of NOP (in fact, it will execute ORI.b #0,D0)....

  • Arduino Code
  • Instructions     from Arduino Negative Voltmeter
  • // i2c and u8g library for 1306 oled display #include #include "U8glib.h" #define R_LOW 100 // 100k or 10k resistor, 1%, smd1206, 1/10 watt #define R_HIGH 5000 // 5M or 500k resistor, 1%, smd1206, 1/10 watt #define AREF 1.1 // Aref pin voltage #define...

  • Uploading the code
  • Instructions     from Arduino Controlled Safe (Locker)
  • *** FIRST DOWNLOAD AND INSTALL THE PASSWORD AND KEYPAD LIBRARIES *** JUST EXTRACT THEM IN ARDUINO LIBRARIES FOLDER Install the above mentioned two libraries. You can download them directly from the library manager or you can download the zip file and...

  • On The Go Coffee Maker
  • Instructions     from On The Go Coffee Maker
  • Program LinkitOne to Control the Coffee cup using Bluetooth android app.Attach the LM35 temperature sensor to A0 pin, Transistor base switch and Bluetooth antenna to LinkitOne.Thus LM35 reads the temperature and send it to android app through Bluetooth....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday