81 Results for "TTL computer"

In this example, we use Adafruit Ultimate GPS Breakout. Its data format is pure text, so we can connect it to USB to TTL Adapter and observe the output.It follows the NMEA sentence format (refer to http://aprs.gids.nl/nmea/)The GPS signal is weak...

An overview over what components and tools were used in this build. More on how the parts were selected in the next step. The components are divided among what's needed to make the PCB which acts like the watch movement, and the watch body itself. Electronics...

Block diagram & electronics:The 3 reed switches were mounted vertically in the aluminum part of the staff and connected to the micro-processor – in this case an Arduino 3.3V. I used 3 sensors in order to created different function that the staff can...

Hardware overview - Getting started with RYLR998 module. This module is a UART Interface enabled 868/915 MHz LoRa, with Antenna Transceiver module. You can know more about this module and download the datasheets from its Product Page. How to configure/Program...

How to Bypass the BGW-320 and Using an Azores WAG-D20 Most people with fiber have two ways to connect to the internet - fiber to an ONT, Ethernet to a gateway or fiber directly to the gateway. In this article, we will focus on how to bypass the BGW-320...

Step 1: Gather Your Components Laser XY Scanner - BOM I usually like to source my parts from DigiKey, but the low-cost options on Amazon are hard to beat sometimes. This list is just one of many sources for each component in the BOM. There are of...