2552 Results for "8-bit cpu"

16 word (2 bit/word) Relay-Capacitor-Diode Memory Test
Instructions from Relay Logic Memory Game (Simon)

Step 39 – Solder 8-way connectors to 8-way 90-degree headers for M5 Stick C Plus 'Tiger'
Instructions from "Mercator Origins": Sat Nav & Telemetry for Divers
The 8-way HAT for the M5 Stick C Plus ‘Tiger’ requires an 8-way Micro JST male socket and an 8-way 90-degree header to be soldered together. Hot glue has been used to mechanically reinforce the solder joints at the header end. All pins have straight...

8 - Plastify and re-cut two circles in the previous
Instructions from Covid 19 washable origami mask

Step 8: Cut All Fibers at Map Level
Instructions from The World Is Mine!
Using wire cutters, cut all fibers to the level of the map

Modify the Comms Link - part 1 - the easy bit
Instructions from Getting online with a 1987 Psion Organiser II
The next step is to physically connect up the HC06 Bluetooth chip to the Psion Comms Link. To find out how to do this, I looked at the diagram at this (now sadly Wayback-only) page: http://web.archive.org/web/20180411125903/http://archive.psion2.org/org2/topgen.htm....

Step 8 - Glue the three 3D printed parts together
Instructions from A Self-Driving Car using a Raspberry Pi Zero
Glue the Camera mount to the front of the base.Glue the Pi mount onto the base part.

Creating a 32-Bit UEFI comaptible Live Boot Stick
Instructions from Liberating a $50 Windows Tablet
I like to write code listing so that they can be easily copypastad. Please do so at own risk. Some values, links etc. may be out of date. Instead of executing the code listing, you can also follow the instruction from the Arch Wiki Article.# parameters...

STEP 8: SD Card and Prepping to pull
Instructions from The Recreator 3D - Make Recycled PET#1 3D Filament
STEP 8: SD Card and Prepping to pull. - Load the 600mm suggested speed gcode onto the SD card. - Load Filament into Nozzle. - Go to Control, Temperature, Nozzle and turn to 210. - Go back to Main Prompt to watch the heat rise. - Load...

Step 8: OPTIONAL - CONNECT YOUR BLINDERS WITH MICROBOT PUSH
Instructions from Entrance Master Remote (w/ Raspberry Pi)
MicroBot Push is a small device that presses buttons for you, which is a practical way to connect appliances at home. If you do not have connected blinders at home, you can place a MicroBot Push on the blinders remote to connect them. That way, pressing...

Step 8, disable debugWIRE and leave target for normal use
Instructions from Debugging Arduino Uno in VScode
Exit any debugging session. In terminal, swtich to dwdebug's location and run ./dwdebug device usbtiny1. Type qi to quit debugWIRE Then program fuse back with /Users/sundeqing/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino9/bin/avrdude...

Using the IC to Control 8 LEDs Together
Instructions from 74HC595 Shift Register Tutorial | Arduino 7segment
So now as we have the knowledge about the working of the IC and its operation, therefore, we can now move ahead and get a demo over how to use it in circuits and in this way we will also be able to understand its working. What we will be doing is that...

On your FPGA workstation, install RISC-V compatible, 64-bit version of GCC and binutils.
Instructions from Kestrel-2DX
I'm using GCC 5.6.0 personally; I believe the latest is 7.0.

Step 42: Prepare M5 Stick C Plus Tiger 8-way Micro JST female plug
Instructions from "Mercator Origins": Sat Nav & Telemetry for Divers
Connections to the two reed switches, ground and the leak detector are made to the Tiger 8-way Micro JST female plug. See schematic for pins and further details.

Step 40 - Solder 8-way connectors to 8-way 90-degree headers and phototransistor/resistor for M5 Stick C Plus 'Mako'
Instructions from "Mercator Origins": Sat Nav & Telemetry for Divers
The 8-way HAT for the M5 Stick C Plus ‘Mako’ requires an 8-way Micro JST male socket and an 8-way 90-degree header to be soldered together. All pins have straight through connections. There is also a resistor and phototransistor that needs to be connected...

Attach the Orange Pi to the HD case Using 3/8" hexagonal spacers (standoffs).
Instructions from TankServer

|<
<
5
6
7
8
9
>
>|