27106 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남드림레깅스룸∈₄seize㈚강남드림강남드림레깅스룸つsend 선릉드림선릉드림 선릉드림き선릉드림레깅스룸タwarmthぼ"

Open Indirect Ophthalmoscope
Instructions from Open Indirect Ophthalmoscope
The step by step build instructions for "OIO" can be found here: http://www.instructables.com/id/Open-Indirect-Ophthalmoscope-OIO/

DMX-84: Calculator-Controlled Lights
Instructions from DMX-84: Calculator-Controlled Lights
Now, go to the source folder and navigate to src/ti. Send the file DMXDEMO.8Xp to your TI-84 using your preferred linking program. If you don't know how to do this, read http://tiwizard.com/transferring-programs-to-your-....Note that there is also...

AVR - ATMEGA32/1280 development board
Instructions from AVR - ATMEGA32/1280 development board
I can send Eagle files , just ask

A society of things
Instructions from A society of things
Tell the monitoring hub to send the start signals.

Burn the software
Instructions from Smartphone Bluetooth controlled toy
Connect Arduino to the PC and send the sketch to it.

RPi Bittorrent Sync Server
Instructions from RPi Bittorrent Sync Server
Send QR code or secure key to phone or other device.

Open file RelaisST.ino in Arduino and change ssid & password. Send to ESP-01.
Instructions from Relais ESP-01 iot sur SmartThings

Order Boards
Instructions from M4-Breadstick (Retired) → Raspberry Breadstick
Send the files to your favourite PCB assembler.

Send gerber files from /hardware on Github to your favorite board house
Instructions from ABN6502 SBC R1

Send gerber files from Kicad project on Github to your favorite board house
Instructions from Relatively Universal ROM Programmer

LASER Pointer Light Show
Instructions from LASER Pointer Light Show
MotorsNext we mount our mirrors onto the motors. Since we can't drill holes in the glass we need to use some small 1" wood circlesas backing. First drill out a 2mm hole in the center of each wood circle. Then use 5 minute epoxy to glue the wood discs...

Portable environmental monitor
Instructions from Portable environmental monitor
Populate the board. You will need some good experience with 0805 SMD soldering, and some tools like soldering iron and hot air rework station. Start with the bottom side, with the microcontroller, the other ICs and finally the small passive components....

BitMasher
Instructions from BitMasher
Send the PCB to fab house (or print your own if you can handle 2 layers with vias)

ESP8266 Light Switch + Temp Logger
Instructions from ESP8266 Light Switch + Temp Logger
Be sure to write me a comment or send a message if you have issues. Otherwise profit!

Laser cut
Instructions from Noel lamp homemade
Send corel file to laser machine, not much time, I have the final materials.

1
2
3
4
5
>
>|