Close

2257 Results for "rzc216.top ౸ ¹ Ȧ¦α׷ ̺꽺 Ըӽ Ʈ"

  • PCB Top
  • Instructions     from DAFM synth ARCADE YM2151 - DIY kit
  • We’ll populate only the top of the board – it’s the side with the KASSER SYNTHS and ARCADE YM2151 logos. Here’s a shot of the completed board for reference.

  • Top Pannel
  • Instructions     from CyberSecDeck-001
  • As with the main chassis, the top plate be printed in as few parts as possible. The plate attaches with M3 screws around the edge of the case, with holes to feed the screen cables through. and places to mount the front facing I/O.There are also pre-set...

  • Top Construction
  • Instructions     from Nibbler Table Saw
  • I built my top from various pieces of scrap plywood that I had around.   I used a solid section of oak where the nibbler is attached, but the rest is just scrap pieces of plywood.  I really really.... REALLY love it when I can make a project...

  • Top panel mounting
  • Instructions     from Roktrack - Pylon Guided Mower
  • Attach hinges to the rear panel to attach the top panel. Attach sponge tape to the top of the front, side, and rear panels to prevent rain and insect infiltration. Attach small aluminum angles to each side of the top panel with double-sided tape. Then,...

  • Closing the top lid.
  • Instructions     from How to hype your espresso
  • The result of the previous step should look like this. Make sure you put the top lid back in place and the power button has no mechanical issues (got stuck or hard to press) and screw the 4 screws.

  • Make the top layer
  • Instructions     from Customized wireless mechanical keyboard
  • For the top layer, I cut the opening with rounded corners to match the profile of the keys. Note the outside edges of the top layer are still uneven at this point. Once all three layers are assembled, then I will trim all of the edges to be...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday