19513 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Live and Learn
Log from Roadrunner (the Arduino-Tiva)
The boards arrived on Saturday. I finally had time to sit down Monday night and begin populating one. Full disclosure, this was my first time doing and fine pitch or SMT work. I began by doing a full electrical test on one of the boards, which it passed....

Megsy #2 Construction
Log from Megsy? A homebrew Teensy 3++
I've been having some trouble with the first Megsy / Teensy 3.2 / Teensy Audio Board stack, and thought perhaps it would be a good time to try to solder together a 2nd Megsy board. Originally, I had intended to try to hand apply solder paste, and apply...

Design Choices
Log from Pokey Watch
This is just a brief discussion of some of the choices that were made in the design of this project.First and foremost, everything was designed to be fabricated and assembled by me, "in house" so to speak. That meant that any chips had to be hand-solderable,...

Notes on usage
Log from Spring clamp third hand for hand soldering SMDs
Having done a bit of SMD work with this device now it's worth passing a few comments. First of all it makes an amazing amount of difference to SMD soldering in general. I find myself no longer using the magnifier because the component is securely held...

November 2014 - Designing a prototype source pt. 3
Log from Low Cost X-Ray Systems for Developing Nations
Around the end of October, I finished up the design of all the plastic components which would house the electronics of a 200W x-ray system. It was now time to design those electronics!Back in September, I had an idea of how I should go about doing this....

Connect everything
Log from Convert your old phone into a remote switch
Solder everything on pref board.

So it begins...
Log from Open Source Maritime Instrument Project
This project emerged five years ago while trying to reverse engineer a forward looking sonar unit fitted to my work boat. The circuit board was dead simple and looked like a home etch job even though it was manufactured by a major military contractor...

Project Log 2
Log from Raspberry Pi Photobooth
I'm starting with PL2 because it's late and I don't want to write about my code/ GPIO layout tonight!Today I spent some time getting started with the photobooth front. It's a piece of plywood with some mason jar lids glued into holes I cut. In the lid...

The official solution
Log from Megsy? A homebrew Teensy 3++
So I asked about this in the PJRC forums, and evidently Paul has made a board available from OSHPark here:https://www.oshpark.com/shared_projects/d3J03ZebTheir bootloader chips are available here:https://www.pjrc.com/store/ic_mkl02.htmlIt's still missing...

Let Down and Hanging Around
Log from Rämixx500 - Amiga 500+ Mainboard
I was let down a lot by how the "Community" received this board. I thought it would spark a lot of interest, as it could be the starting point for a lot of new things. The first obvious goal was making replacement boards for A500+ machines but this was...

Bringing Up GDEY042T81-FT02
Log from FLOSS Book Serving System
I'll skip to the happy ending. I can drive the display, the back light, and can read data from the touch screen, but achieving those milestones took much much longer than it should've. This update won't have much info on the actual e-reader project but...

Detector Make/Buy Trade and Part Selection
Log from Photo-acoustic Spectroscopy
1.5 nV/√HzDue to the low intensity of the acoustic signals and high noise floor of in-situ environments the PA is usually detected with lock in amplifiers. These can be had used on ebay for ~$200-400 dollars, I'm choosing to make one because:1)...

Aussie Sawppy - Dumb things I did
Log from Aussie Sawppy
So I finally have the software sorted and I can "drive" the servos on the kitchen table by logging onto the Pi's network with my smartphone. A eureka moment of sorts! . I pause here to thank @Roger for responding with generosity and verbosity to my requests...

Tinymovr R3.3 (alpha2) now available!
Log from Tinymovr Motor Controller
Good news, after an admittedly long wait, the new alpha2 boards (R3.3) are now available! These boards have a few layout improvements compared to the alpha1 boards, namely: Better signal routing allowing wider power traces on the rear side of the board....

A guide on powering Pi Zero directly from LiIon batteries
Log from ZeroPhone - a Raspberry Pi smartphone
At the project's beginning, when I was writing the "Features" section in the project's description, last entry was "Tons of Pi Zero-related hacks that were discovered along the way, that I'll share with you as the project goes =)". I didn't actually...

1
2
3
4
5
>
>|