Close

451 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸ㆌ ∩anyway≒강남셔츠룸강남셔츠룸∧warmly 강남셔츠룸셔츠룸사이즈 셔츠룸터치の셔츠룸테란мhearingキ"

  • Proper tools for the job, etc
  • Log     from Relief Printing Press
  • This is definitely not something I would try again without a drill press. I'm in an apartment with only access to a cordless drill, so of course the mounting holes for the vertical brackets didn't drill straight. It took quite a bit of work to get the...

  • Finishing up
  • Log     from Relief Printing Press
  • Assembly complete! The first few test impressions were noticeably cleaner than with my previous methods, but made it very obvious that I was going to need something to help with registration. I looked back through the different ways that various presses...

  • case fitting
  • Log     from 3-buttonmouse with seperate wheel
  • Next was cutting the side facing hole for the wheel:Mainly by a dremel style tool and some marking before, but ended up just bigger than I liked.And I hat to cut some parts of the metal (see above) and some material in the top case part to get it fitting.strain...

  • Securing the outlet tube and a little Welding
  • Log     from Syringe Pump
  • My plan is to use a length of plastic tubing to deliver the output of the syringe to either the extruder or the mixer. That way, the syringe doesn't have to be mounted on the carriage of the printer. The thing that's always worried me is how to connect...

  • Overbudget :(
  • Log     from CNC desktop laser/dremel mill/microscope
  • Seems that I am going overbudget. The initial goal was for doing this "undrer 300 EUR" but the material costs before laser cutting will be pushing me up to 325. With the laser fees added I'm hoping to fit within ~350 EUR for the machine with the pen,...

  • Restart, March 2015
  • Log     from 5g Aquaponics
  • Restarted for version 2 this month.Cut the 'window' in the 5g bucket, made it large. Marked on bucket w/sharpie, at the outer-edges of the lexan sheet held about where I wanted it. Then marked corners in from that. Used a dremel to not-quite-cut-through...

  • Double-check your models, kids.
  • Log     from Hubsan X4 Replacement Frame
  • The SLS Nylon bits arrived last week! I sat on 'em for awhile; I've been digging into another project quite a bit lately (more on that later), so I didn't immediately try putting anything together. When I eventually tried assembling one of the motor...

  • REWIRE!
  • Log     from Raspberry Pi Fona PiHat
  • got around to unsoldering the ugly random breadboard cables and used some small gauge to clean up the bottom a lot, next step will probably be a dremel to open up the SIM card area

  • BMS ECU boards arrived
  • Log     from DIY Electric Vehicle from Recycled Parts
  • Got my boards from Seeed Studio. They apparently had an issue with my drill file and replaced the slots with pads. That's the OPPOSITE of what I wanted for HV creepage distance. A dremel makes it so that I can at least use the board as a prototype. Assembly...

  • Initial Work
  • Log     from Health Maintenance Robot
  • I uploaded a video where I ramble about my intentions of building this robot.I mention some of the parts I plan to use with the robot and give a general overview of my plans.Here are a couple of photos of the two tread sections I've built so far.The...

  • Building the CNC - Enclosure
  • Log     from Muffsy Phono Preamp PP-2
  • For my CNC build, I'm using a 0905 aluminum enclosure. I have already made the back panel, hooking everything up will be covered in another log entry.Before I go on, let's go through what I'm going to do and why.Both boards, the power supply (PSU) and...

  • Beta units shipped
  • Log     from Portable environmental monitor
  • After a sinuous but exciting road, the Beta prototype came out nice, the entire device is amazingly small: I was able to design it to fit the 110x70mm aluminium enclosure I planned initially without renouncing to any of the sensors nor reducing the 1500mAh...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday