451 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸ㆌ ∩anyway≒강남셔츠룸강남셔츠룸∧warmly 강남셔츠룸셔츠룸사이즈 셔츠룸터치の셔츠룸테란мhearingキ"

Cheap flashlights suck...
Log from Color Reader
I had a problem where when I point a flashlight at the sensor I see 0xFFFFFF on the iPod Touch, but every second or so it would drop down very low numbers. I was looking into possible problems in the assembly code produced by Java Grinder but it looked...

Routing Races
Log from Rotat-O-Mat
I am using a Dremel with plunge router attachment to route a round groove in both my upper and lower MDF boards. The grooves will serve als races. Thanks to the crappiness of the Dremel router attachment, one of the grooves became a spiral. But since...

Milled board
Log from Soldering Iron Ring Light
My first try at this was to mill a PCB using my kit-build CNC machine. Now this is a VERY basic machine (from the original http://www.mydiycnc.com kickstarter) with a Dremel fitted to it. I have successfully milled a through-hole single sided board on...

square tubing
Log from Punk-ass 3D printer
I use threaded rod a lot!Along with wood it's my go-to material for making all sorts of jigs and prototypes.It turns out that a local company, Total Stainless, sells stainless steel square tubing, 6m-longX20mm-sideX2mm-thickness, so I bought some to...

Testing the Nixie display board
Log from RPN Nixie Calculator
Everything you build should be tested somehow. Otherwise you put five things you built together and they don't work, and now you need to test them anyway.So when I put together a Nixie display board, I needed to make sure the things still lit up according...

Final thoughts
Log from Mini DRO for lathe
Well, it took some time to complete, but it has been in happy service for a few years now. The 1 micron resolution is a bit overkill as the flexibility of the rest of the machine is the weak link. However, if I ever bother to make a fancy toolpost grinder,...

07 – shitty TMP11x breakout boards
Log from micropower micrologger [mPmL]
As I need to try and connect up to four TMP112 sensors to my logger, I decided to make some breakout boards for them. Individual board will be around 6.5x3.5mm.Address can be changed to one of 4 hex-values by a multi-solder bridge. I did not do fancy...

Polishing the plates/ solder/brazing
Log from cheap versatile High vacuum chamber
I have been spending what feels like way too much time preparing the vacuum plates. Overnight in vinegar did remove all of the mill scale. I do not have a lathe though so I could not do faceing to get a good sealing surface. Instead...

Hardware - materials
Log from A functional Stargate
It's been a slow beginning, but I'm finally finding some time to start making the physical gate. Here are some basic specs:Outer diameter is 19cmMaterial is HDPE and polypropyleneIt is built in four layers: back, spacer/rotating ring, front, chevronsIt...

Finally cracked open
Log from Treep-flo-treep
Step one of a project like this is opening up the donor chassis and seeing what you have to work with. I knew I would see some motors, and since that was all I was going to salvage anyway, that was fine with me. I ran into a problem almost immediately...

Enclosure complete
Log from Time Circuits Timepiece
This case has been watching me from above my desk, 90% complete, for the last 8 months. I sat down last night with a craft-knife, Dremel and sandpaper to finish it off: The display windows/covers are 2mm thick transparent black acrylic, cut and shaped...

More Thoughts
Log from Shop Reorganization
Here is another new idea. By rearranging things a bit I can manage to grow the size of my support tables, at the expense of the work table size. My current CNC is 24"x24" but I have parts to resize the CNC up to roughly 32"x32"...

Build log 1/1
Log from Alienware battery repackaging
What do we have? 0. A gaming laptop from Alienware with broken battery 1. Broken Alienware battery from that laptop 2. Working Alienware battery from a different laptop Ain't no Alienware warranty on this laptop anymore, and being tethered to a wall...

Bit modification and tests
Log from PCB mill for under $10
I started with a 2mm cheap drill bit and turned it into something a little more appropriate. The only tool I used for this was an angle grinder with a cutoff wheel. I intended to use a small file to finish it, but the angle grinder did such a nice job,...

Still here, still working on it...
Log from Electrospinning Machine
It's been a while since I last added an update, so I thought I'd let you know I'm still working away at it. This is definitely a 'one man band' act here, and sometimes it gets a little off key. :P What I'm doing at the moment is writing up the assembly...

1
2
3
4
5
>
>|