YouTube How to update CircuitPython firmware This method is suitable for the BPI-PicoW-S3 board that already has tinyUF2 firmware. If the flash of the board is erased or the failure to enter the UF2 mode occurs, you need to refer to the method of burning...
See Update BelowContext being more that of the puzzle of cases not one case "to rule them all," but I digress. The past week I've been going through a few catalogs to find an enclosure for D-DAQ's mainboard. Previously, the PCB's form factor was based...
Note: this log is obsoleted by BitsliceAfter the last log Adder with Falstad, I also converted the ROP2 bitslice to the interactive simulator : There is still the challenge to disable the output of the CLA so it can be combined by ORs with the rest...
In this post I want to share how I selected a suitable topology for the resistor network that will be the core of the programmable decade resistor. Although I did some online “research”, the following criteria determined my choices: Switch...
Stephen : Alright, let's get rolling. A BIG hello to @Parker for joining us today Parker : Howdy everyone Stephen : @Parker, why don't you kick this off by giving us an introduction of who you are, what you do, and what...
Thursday, 06/07/2023, 12:40.(I wrote this project log before copy-pasting it here) Anyway, back to DIY electric motors: I can't simply use two 10:1 reduction ratios (which would give 100:1 in total) simply because if I want to reach 30 rpm with...
I started wiring up the Memory sub-system board and realized quickly that I needed the display board to show the state of the various registers. I first had to create a backplane to connect the boards into. The backplane carries all the signals...
I love it when I can find parts that someone else designed, it saves me time and effort. Aviator67 produced a treasure trove of add-on parts for the farscape1 LUT. After printing and assembling the Level30 floor framing along with the cable tray template...
So I've recently got a fully electrically and mechanically complete CAD model of Tetrinsic and was, once again, doing some research for Tetent, mainly because I don't like how this featureless flat face looks: It turns out that the eteeController...
Dan Maloney10:27 AMHi @Kip Daugirdas! Welcome aboard! mark joined the room.10:52 AM bsigler joined the room.11:24 AM Alex Mi joined the room.11:31 AM Alex Mi11:32 AMmy question :) - how people decide between liquid fuel and solid fuel...
21/07/2023, Friday, 10:16. For some reason this last week got me too lazy to do anything at all... Well, I will just leave this here and see what I can think of... ----------------------------------------------------------------------------------------------------------...
caladan12:39 PMI think it's C++ on CentOS 7 daniel valuch12:39 PMactually, guess what it was Rosy Schechter12:39 PMHere are the libraries for data analysis: https://root.cern/ daniel valuch12:40 PMwhat was the mean time between failures when LHC started...
So we had an idle Friday afternoon here at SupplyFrame HQ and our evil overlord Alek asked us to build something cool for the office.With the restriction of only having a day to build we didn't have many choices in what we could source components for,...
So just after presidents day we came back into the office and found that the FLED was dead! Turned it on and nothing happened. After eliminating the ATX PSU from the equation it became clear we would need to pull the display down and open it up to find...
This entire project is a little bit of an odd bird. In terms of electronic sophistication, it’s not too different than any of the other homebrew computers you might see on Hackaday. This isn’t a project that will just sit on my workbench until I die...