Close

685 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • I've Been Framed!

  • There's actually not much to be said about the LCD frame. In fact, now that I look back through the hundreds of pictures I took during the construction of the reComputer 1000, I realize it doesn't seem like I ever took a clear shot of the thing in isolation....
  • How I design

  • Designing for this project required many different approaches. Sometimes it was easy enough to take measurements, design the part in question and make it according to those dimensions. Other times it would be exceedingly difficult to measure all aspects...
  • Still troubles with the sleep mode

  • The sleep mode on PIC32MZ proved itself a nut quite hard to crack. A ton of registers to control power to this or that, and still no single solution that simply puts the chip into sleep mode. Microchip haven't learned their lesson yet, apparently.Anyway,...
  • Final installation

  • The only major (and irreversible) modification I had to make to the body of the phone was drilling a hole for the power adapter to plug in to. Unfortunately I hit one of the screws that was used to hold the frame of the phone onto the back, but it still...
  • Assembly and testing

  • It's time to assembly the unit inside the earth globe... The screw and nut assembly with a magnet attached simulate the earth globe. Everything seems to fit, lets power it up.. And now with the earth globe attached.. This was the easy part :) Let the...
  • First laser cut prototype

  • disclaimer: some of these posts are describing things that have already happened. im post documenting alot of things since i think this is a cool project that uses alot of different skills.Im a person who really likes to see/touch what im building so...
  • From Inception to Now

  • This blog is being transferred from my own website to Hackaday so this post is going to serve as a summary of progress from inception to present-day. Earliest post Since I'm starting from scratch and I don't know anything about go-karts, I decided to...
  • Building the Y-axis

  • I've now built the aluminium frame and completed the Y-axis. Of course, this was not without it's problems.Firstly, I misordered - I was one set of uprights short. This may not be a massive problem though, as I hadn't taken into account the...
  • Working 3D case, firmware upgrades

  • The 3D printed case works!After a few changes, like too small holes and so on, we have a fitting 3D printed case now.We also altered the mouthpiece, using a cigarette tip (cheaper and easier to buy here).In addition to the new case design, we also updated...
  • Updated SnackClock for 2021!

  • We revisited this project this year to dispense high fat diet over a 24 hour cycle, and decided to make the design more reliable.  Where we used to just push the pellet disk onto the clock mechanism and hope friction held it together, we now are...