300 Results for "N 온라인손오공게임 CDDC7닷컴 ◆프로모션번호 b77◆용산카지노㈣월드컵예선경기생중계ᇭ하노버ᇡ토토신🍋온라인손오공게임강추 luniform/"

Complete 18KHz source
Log from Yet Another (Discrete) Clock
The complete 18KHz clock source is there :Now I mustBuild the prototypevalidate all the parts' values (easy)verify the frequency and tune oscillator to the best possible precision (but my Rb source fried and my DDS is far from alive :-( )place & route...

Finite State Machine Panel Wiring
Log from TMD-1: A Turing Machine Demonstrator
As with the Tape Panel I started by wiring all of the ground leads together for the LEDs and buttons then added a jumper so I could attach the ground(s) to one of the Expander's extra GND pins. I added limiting resistors to all of the lamps. Then I mounted...

Mea Culpa
Log from No-Worries Parallel Battery Charging Station
[Edit 2021-09-18: Changed resistor types to all 1206. Hopefully, this will help future proof the circuit to work with a larger assortment of chargers.]I screwed up. I calculated values for R1, R4, R6, R8, R10 and R12 based upon cell voltage differences...

Making the Flippin' Thing Flip
Log from The Big Flipper - Four Letter Word In Flipdots
I should say how to make a panel flip. If you look at FredericL's project https://hackaday.io/project/159415/ and watch Lansing Maker's Network excellent video on the Flipmaster9000(!) on Youtube then you will know all about how they flip. So you will...

Controlling a brushless motor (BLDC): Hardware
Log from FlexSEA: Wearable robotics toolkit
The BLDC schematic consists of 3 copies of the Half-bridge sheet (motor commutation), the Shorted-Leads protection circuit, phase voltage sensing and bridge temperature sensing.U7 (temperature sensor) is routed close to the power MOSFETs. Figure 13 shows...

Calibrating the calibrator
Log from Python Powered Scientific Instrumentation tool
The last log dealt with testing a 24-bit ADC, the AD7718 , and I may have mentioned that its main aim for now was to serve as a calibration tool.However, In order to use it as one, It itself must first be calibrated against some industry standard high...

Bill of Materials
Log from A Versatile Labtool
For developing the prototypes, I've sourced parts from a variety of dealers, but for the sake of uniformity, the following table has been generated with most prices obtained from element14, with a few exceptions.Total Price : $47 Package Designation...

Tiny PCB (with links)
Log from WS2812B Delay Splitter
Since I had inadvertently deleted my original circuits.io project and needed to spin a new board anyway, I shrunk it down to a 0.4x0.5" board. I had to rearrange the SJ pins some to route everything, so it's now got the following pinout:46120 pinPCB...

CONTROLLER
Log from THE GEM - Smart LED Grow Lamp[Light&heatsource]
Features:SAME51 MCU 120 mhz M4 architecture with CAN FD (https://www.microchip.com/wwwproducts/en/ATSAME51J20A) TMC2209 stepper driver (https://www.trinamic.com/products/integrated-circuits/details/tmc2209-la/) MOSFETS BSC0925ND Dual channal 40amp 17nC...

Wemos Mini PRO
Log from Green Detect
To build my wireless sensor network, I chose the Wemos mini board, based on the ESP8266 chip, for the following features: • Compact dimensions • Low price (around 6 euros) • Possibility of being programmed with Arduino IDE • Very low consumption: 70...

LAUNCH! Final Proof Test: Building a Test Sound Player in C
Log from HBSound
Introduction: So over the last week or so, I have been building on trying to test out HBSound at speed in a way that verifies all of the different subsystems of the module. In order to do that I had to make some slight modifications...

Lab on a chip design
Log from Medical tricorder
As mentioned already under "Project details" I am planning to add a Lab-on-a-chip system as a peripheral device for the medical tricorder. It is basically a photometer/color sensor mounted beneath a translucent micro reaction chamber with two inlets...

PCB Ordered
Log from Shower Metronome
Finished the PCB layout. The Pololu regulator will be mounted under the main PCB. There is a plastic stand off that will need to be removed for clearance. There was a corresponding hole on the PCB to secure it to the case but none of the ones I've opened...

Random absurdities
Log from CD/DVD mechanisms and cartesian thinggie[s?]
This'll probably be updated, rather'n making new logs. I'll date/order them newest-to-oldest...(9-22-15) X = Scanner, Y = Printer, Z = DVD. Duh. I don't know why I didn't come up with this... (9-11-15) @Al Williams posted to the blog a build using a...

Layout 99,9% finished
Log from HACK
Hey there,the final layout for HACK is 99,9% done; I only have to check if copper pours are connected to ground, and then I need to place fiducials markers around to ease the job of pick-n-place machines.So far the mods made from the original idea and...

|<
<
1
2
3
4
5
>
>|