Close

914 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • Spectrometer Progress
  • Log     from ramanPi - Raman Spectrometer
  • Here is a quick report of my progress with the spectrometer design..  It's nearly complete.  I have some minor details to finish up, like baffling, the access port, the focusing mirror mount.. and the CCD mount..  I printed a test and...

  • 3D printed parts and sparks
  • Log     from DIY fiber optic sensors
  • I designed parts of LPG inscriber in FreeCAD and printed on my MendelMax.Then I attached it to my translation stage (no rework was needed, it was OK on first try) and connected stepper motor driver. Firmware in driver is brain-dead simple - afer reset...

  • slight change of plans
  • Log     from repurposed luminiferous aether detector
  • here is how the construction of the interferometer has gone so far.  I cut the 4"x4" tubing from a 10 foot section of spare tubing that I've had in storage for about ten years.  It was cut off using a router and straight edge.  I drilled...

  • Reverse Disassembly
  • Log     from Tron:Legacy themed Arcade
  • I didn't have much time to document the process as we were assembling, nor did an incredible website such as hackaday.io exist at the time of construction. I'd still like to show off how we put these together, so these are actually photos taken during...

  • Log #14 Hostile Environments
  • Log     from Remote Water Consumption Display
  • So, I've been working on my receiver code off and on as time permits. During this time my prototype sensor/transmitter was out at the water meter. I had placed it in zip-lock bag and tightly closed it with a rubber band. That was in another bag, and...

  • Sun Tracker Module
  • Log     from SAM - Solar Automation Machine.
  • Testing the functionality of the sun tracker moduleThe suntracker is made from :- a radio shack/ thesource project box.- protoboard- 3x photo resistors- 3 resistors - some cat cable, - rj-45 jack- heat shrink- rubber tubing- hotglueThe...

  • The Slippery Wheels Conundrum
  • Log     from Cheap and Easy to Build 3D Printer
  • As soon as I got back from my trip I started working right away on the question of the slippery omni wheels not gripping very well to the XY plane, due to the plastic rollers. I was already expecting this to be an issue, I was just hoping for it to be...

  • Test video + project update
  • Log     from DIY USB MIDI controller MPC style
  • Hello there,In this log I'd like to share with you a few more photos of the construction process of the first revision of this MIDI controller as well as a video which shows the very basic functionality of it. In the video you can see me mashing on a...

  • Source code available! + quick update
  • Log     from DIY USB MIDI controller MPC style
  • Hey guys, Today I had the time to sit down a few minutes on the project and I got the first revision of the code finally available, after more than two months have passed since I did it. Code available here: https://drive.google.com/folderview?id=0B-yo2xApQsSeMm5RcHg0V0JJQmM&usp=sharingSoon...

  • Mounting/drilling
  • Log     from Trash light
  • Just a quick update, been super busy registering for my last semester at school. I have drilled the holes in the lid I am using as the base of the project.It was easy to space them out, since there were eight equally spaced notches in the side of the...

  • The rubber gaskets
  • Log     from Global radiation monitoring network
  • As the uRADMonitor Model A is intended as a environmental radiation surveillance tool, that should be run outdoors, we’ve designed rubber gaskets for the aluminium enclosures, to make sure rain will not get in to damage the components.Now finally...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday