4640 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗강남퍼블릭┟┥robert강남퍼블릭ⓐ퍼블릭룸강남퍼블릭┖ぢ퍼블릭술집marquis 강남퍼블릭ぷ셔츠룸퍼블릭Ｆⓤstrict"

Ground Rules
Log from Modular Tablet
I am finishing partial schematics for this bridge and I feel if anyone else wishes to base their design or give me any ideas on this I should set up a few ground rules. I am setting these rules based on the limitations that I have found that are affecting...

Deciding A Platform
Log from Modular Tablet
After four months of continual silence from life getting ahead of me, I have had a chance to sit down and truly figure out what the platform will be based on (who got knocked out by me being in the quarter finals even though I resigned?). I had my original...

I'm Back and Adjusting Some Perameters
Log from Modular Tablet
These past three months have been insightful. My dream project has been on the forefront of my mind for 4 years now. While waiting for Google to do something it has given me a 3 month reprieve of not even looking at this. I have had time to pick up an...

New Enclosure
Log from LED Matrix Fairplay hack
The matrix display is being prepared for the Omaha mini maker faire. It needed to be enclosed to keep prying hands away from the 120V power. The enclosure was a scoreboard controller box that was saved from scrapping. This was the perfect...

Erica Plinth Upgrade
Log from Erica The Cyber Rhino
As a part of taking Erica to the big bang her plinth needed improving. The original version had a single captive mains cable to provide Erica with power. Although this was fine when Erica was in the Marlands we have since discovered several issues...

Care and Feeding of MOSFET Bridges
Log from DC Current Transformer
In this entry we'll look at how to deploy MOSFETs in bridge circuits. (This is also applicable to IGBTs.)Switch mode electronics are great - they are usually smaller and more efficient than similar linear circuits. However, there are some limitations...

PCB v2 is almost ready for fab
Log from The Quub
The PCB v1 has been in use for a while now and some support code has been written to remap a few of the default Adafruit pins to get a second UART etc. During the course of this I had many new ideas and have modified the PCB substantially. It's...

New look, new color, new everything.
Log from C64 Flash Cart
I have received some much appreciated design help from Runar Borge, and thanks to him the board is now fully redesigned to fit inside a standard cartridge housing. We've also discarded the atrocious bluetooth module and focused on USB instead,...

Dead reconning and particle filter
Log from Autonomous Pi bot
After outputting delta heading to csv and graphing it I determined the maximun valid rate of change to be 25 degrees per second.I capped the output of the gyro to this rate which resulted in very accurate dead reconning data considering the ground slip.This...

Arduino Sketch
Log from Web based solar panel monitoring/managment
Here is the Arduino Sketch. Nothing fancy. It is a mix of my code, code fragments from other peoples projects as well as vendor sample code.#include #include // Enter a MAC address and IP address for your controller below.// The IP address will be dependent...

Post-Mortem
Log from Sci-fi grade Home Automation
The system works, and just in time. I'm sure I will continue to expand this at a later date, and there are definitely a couple areas that need some work. That said, I think the core concept is good, and is useful as a design philosophy for systems like...

Interfacing Dial Indicator to Computer (using PIC Chip)
Log from Digital Dial Indicator CNC Surface Probe
To convert the low voltage (~1.3V) custom protocol output by the dial indicator to something that will be readable by the computer I have chosen to use a PIC microcontroller. Specifically, I will be using a PIC12F1822 because it's cheap, small, well...

Introduction
Log from rbServo
I have been thinking about this project for some time. It all began with a video on Youtube of a hexapod robot: I was really impressed with the fluidity of the motions, and started reading up on motion control. I experimented with Inverse Kinematics,...

The Next Version
Log from CANtact
This project got put on hold for a number of reasons. Now it's back, though I've changed course a bit.After talking with lots of people, it seemed that there was a need for a basic tool for getting on CAN that's easy to use. I decided to reduce the scope...

Light Sensor Evaluation (Success)
Log from Peril-Sensitive Sunglasses
The tiny light sensor board gives some nice and stable analog readings based on amount of ambient light. It gives a "0" well ahead of full darkness however.Software-wise I treat it almost identical to temperature sensor - read values...

|<
<
3
4
5
6
7
>
>|