Close

69 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》텐하드룸ぉぅvictorious≒텐하드레깅스룸텐하드레깅스◀texas 텐하드선릉텐하드 텐하드룸セ텐하드룸⇒like㎂"

  • Enclosure Assembly Complete!
  • Log     from Windicator
  • We have an enclosure! This weekend I was able to get the 8”x8” electrical enclosure drilled for the stepper motor and dome covering the motor. Here’s a quick synopsis of what I encountered.Mounting the motor took slightly longer than expected...

  • Cutting the plastic sheets
  • Log     from Mermaid Tail
  • The plastic sheet can be difficult to find, but is available at home depot.  It is in the wall paneling section as it is intended to be glued to commercial bathroom walls. It comes in 4'x8' sheets for about $20 USD.  This is the 0.060" thickness,...

  • Choosing the gates
  • Log     from YGREC8
  • In case you haven't heard the news yet, there is an open source PDK in the making for a 130nm node, and a promise of free, gratis chips ! https://hackaday.com/2020/06/25/creating-a-custom-asic-with-the-first-open-source-pdk/ This is what I had been preparing...

  • 1/8 buggies
  • Log     from Ultimate running aid
  • Burned 3926mAh going 6.45 miles, or 608mAh/mile.  The camera system with HS-311 made it as bad as a brushed motor.  Using P200, D1000, it was stable enough to be useful, at 9min/mile.  Any faster & the oscillations grew.  It burns...

  • The Control Panel
  • Log     from Simple ALU from discrete components
  • Building the Arithmetic Unit is great, but as it is there is no simple way to assess its workings. As I've built it, I am personally know what to look at, but for most outside people, the shining of the LEDs on the board is still cryptic. Also, by no...

  • Scraping
  • Log     from Macbook Pro RAM upgrade
  • Well i have a shipping notice on the RAM, but i still need to confirm everything might work. My chip has two different letters in it's code compared to the original Macbook RAM as shown by iFixit. The SK Hynix site does have some documentation on some...

  • uECG now on Windows!
  • Log     from uECG - small open source wireless ECG sensor
  • Unbelievable, but it is a fact! We have finally released our application for Windows, macOS and Linux! Initially, we were not sure that there would be a need for Windows application, but with your feedback we realized our mistake :) The process of installing...

  • Useful Resources
  • Log     from Simple Microcontroller (STM32) Breakout Board
  • Getting started with STM32F0x1/x2/x8 hardware development: https://www.st.com/content/ccc/resource/technical/document/application_note/c9/19/d7/b8/6b/0e/4c/d3/DM00051986.pdf/files/DM00051986.pdf/jcr:content/translations/en.DM00051986.pdf. Useful...

  • Quick Market Survey: What kinds of kits are available?
  • Log     from CUBEx8
  • A market survey revealed that there are many kits available for discrete, thru-hole LED cubes in x4, x6, and x8 sizes. There aren't many kits for cubes larger than that. Most of these kits are inexpensive and include a pig-pile of thru-hole LEDs and...

  • Set some initial goals.
  • Log     from CUBEx8
  • People tend to view goals as admirable things to strive towards. An engineer tends to view these as constraints that begin to define the design. After looking at YouTube videos of various cube sizes I decided to design an 8x8x8 cube. If designed properly...

  • Which smart LEDs to use?
  • Log     from CUBEx8
  • The two primary smart LED types favored by makers are the WS2812 and the APA102. The WS2812 requires only a single 5V logic level signal to drive a daisy-chain of LEDs. Hundreds of LEDs can be controlled with a single GPIO pin. The downside is that this...

  • First Life
  • Log     from HydraMETER
  • Parts came in, assembled and got the major pieces of the analog front end working together.This is the input attenuator that allows higher voltages to be measured (up to ~200V right now, but easy to change the ranging), the PGA for measuring smaller...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday