Close

5166 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • Working Software
  • Log     from E-Ink Display Adapter
  • After connecting my microcontroller and display to my board, I tried displaying test patterns with code based on sprite_tm's. I did get a reaction from the display, but I kept getting vertical streaks while trying to write a single row to the display....

  • Longer Test of the Sensor Tile
  • Log     from STM32L4 Sensor Tile
  • 09/23/2018As part of my test of using a small solar cell and the BQ25504 breakout board to power an environmental data logger (using the SensorTile v.01g as a vehicle) I collected about six weeks worth of data. This is the longest stretch of data I have...

  • Part Round-Up: The CPU
  • Log     from Reverse-Sleeper Gaming Rig
  • This part was obtained on March 10th, 2017.The CPU used in this project is the Intel Pentium w/MMX Technology, clocked at 200MHz internally with a 66MHz bus speed. It uses an eclectic 2.8V input voltage, which was strikingly high for the era. It's the...

  • First Game
  • Log     from µGame
  • In order to write a good game framework or library, you have to make games. There is no other way — you won't know whether you have all the necessary features until you actually try. And you won't know if a feature is actually necessary until you need...

  • Making rings
  • Log     from wirez80
  • Making the 24 rings (16 for the address bus, and 8 for the data bus) rings was fairly easy. I just wrapped each ring around tin of paint that had a good circumference and snipped off the end of the wire (while stil on the tin) so that the ends overlapped...

  • Packed Flags
  • Log     from Lookup Table ALU
  • Simultaneous conventional flag output from one device can be had at the loss of Carry Select and eight alternate tables. I have a plan B, called "packed flags", to store much more efficiently. But doesn't allow simultaneous output and still wants at...

  • Goals and initial design
  • Log     from High-resolution LED bargraph
  • The design goal is produce a LED array that can be a good substitute for a IN-13 Nixie tube, and easy to control from a microcontroller. After looking at available options, I decided on these design elements: 0603 LEDs and 16-bit constant-current shift...

  • Module #2 - Control Voltage
  • Log     from Modular MIDI
  • This module is a general control voltage module. It can generate DC voltages, low frequency signals and envelopes. It is intended to be configurable so it can be used in many different setups. It should also be possible to save configurations to EEPROM...

  • RC2014+VW Bus
  • Log     from Zara80
  • The bus I'm using is based on the RC2014 bus. It's primarily a break out for the Z80 pins with a few notable changes. The biggest change is the use of a JAE TX-24/25 connector instead of 2.54mm headers. The RC2014 boards suggest not using pins 40 and...

  • Power
  • Log     from Industrial 6GHz RF analyzer/generator in a desktop
  • One of the nice things about this whole concept is that -by coincidence- there is no need to mess with a power supply / regulator circuitry for the PXIe instrument. In general a module needs a +12V and a +3.3V rail and a +5V with negligible current draw....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday