5166 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

Donor Cabinet work
Log from Star Trek: The Mirror Universe Pinball
7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

[T] Minimum radius issue!
Log from Tetrinsic [gd0041]
The current solution... may fail, due to: - turning radius requirements of the 3.2mm ball chain approaches the motorised sprocket diameter. So I've implemented some tweaks and learned a few things. Firstly, unlike what I assumed months...

As the gear turns
Log from MultiBot CNC v2
Edit, fixed some bugs with the equations. --- For my rotary project I needed to 3D print a gear that would interface with a toothed timing belt. However when I tried to wing it and make one without doing any real research the belt did not interface...

Version two: PCBs complete
Log from epRISC Open Computer
Title says it all - just placed the order for version two's PCBs and feeling cautiously hopeful. The hardware on this board is a major step up from the last:Two MAX 10 FPGAs (one as the CPU and the other as an I/O controller) vs. one Cyclone IV16K logic...

Will Reflection Delay Work?
Log from Water Waves To Sound Waves
The first experiment will be to measure the intensity difference between the initial pulse and the resulting echo. I will try it in open-air first, no tube involved yet. We'll see how that goes. If that doesn't work, I'll need to scrap this concept and...

Project Log 64: DIY Linear Actuator.¹
Log from DIY Mech/Exoskeleton suit.
21/07/2023, Friday, 10:16. For some reason this last week got me too lazy to do anything at all... Well, I will just leave this here and see what I can think of... ----------------------------------------------------------------------------------------------------------...

Parts, parts, parts...
Log from YGRECmos
I received the 74HC181, 74HC182 in record time from deivic ! The same day the 74HC259 arrived too !I must dig the project boxes of the #Discrete YASEP to find all the necessary 74HC251, 74HC253, 74HC193 and others I need for this processor. It's fortunate...

Status 6/18/16
Log from Web Enabled Microscope
Started modeling the 3D printed focus motor holder in Fusion 360. The plan is to have one side of the motor on a pivot, and the other side with a tension spring pulling up on it and keeping it in contact with the focus wheel. Ideally the force would...

We're rolling
Log from AND!XOR DC25 Badge
It's been awhile since our last post, if you've been following us on Twitter you'll know that this week our Kickstarter campaign finished (thank you everyone!) and we placed our final order for hardware.We've done 4 rounds of prototyping up to this point...

16-bit Dividing
Log from One-instruction TTL Computer
I've been programming furiously. I have 16-bit functions going - Add, Subtract, and Divide. And I have 8-bit multiply going. I've changed from putting the operands on the stack to having a dedicated memory location for them. I...

06/16/2019
Log from T962A Controller with 5"/7" Touch TFT (*STM32*)
I should be posting an initial version 1.0 of the code this week, as well as production hex/binaries for easy flashing. The code is pretty good now, will have plenty to improve/work on as this moves forward, but it's at a nice spot now.I will work...

Upload firmware and program LED's
Log from Board for modular LED wearables
There are not a lot of boards out there using Micronucleus, but Digispark is one of those boards. I created a custom board within the hardware specifications of the Digispark boards were I added a ATtiny84a running at 8 MHz. Unfortunately the core kept...

Log 5
Log from ESP32 EEG
All 4 channels are up and running now, and I've got the impedance measurement circuit put together but still haven't tested it. I also found a seemingly more stable way to start up the MCP (by starting each channel in shutdown mode, instead of soft reset...

Using my #ABN6502 SBC R1 to test RIOTS
Log from ABN6502 SBC R1
When I'm talking to my friends it's not always easy to explain why I would put together a computer out of 40-50 year old parts, but besides having fun with it, it really does have a lot of practical value. Since it's sitting there on my desk anywayy...

Project Log 47: 3D modelling attempt 2.
Log from DIY Mech/Exoskeleton suit.
It is Wednesday my dudes. 09:24, 03/05/2023 Well, 5 of may will be my birthday, I hope someone suddenly appears out of nowhere with a free complete 3D CAD model of a mech... (as if). Well, I don't really need to 3D model every gear set that I would...

1
2
3
4
5
>
>|