63 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워⊇ けluck⑻쓰리아워레깅스룸쓰리아워가격ㅬproposal 강남쓰리아워쓰리아워레깅스룸 강남술집정보㎔강남쓰리아워ちreverseㅿ"

Emulating a CNC router with a laser cutter
Log from I LOVE LAMP
I have had terrible luck with tear-out when milling plywood on the Shopbot. Here is an example of the kind of issues we're experiencing:Notice how the top ply or two is getting ripped up during the milling process. And this is when using down-cut endmills...

Project Log 58: DIY Electric Motor¹.
Log from DIY Mech/Exoskeleton suit.
Thursday, 06/07/2023, 12:40.(I wrote this project log before copy-pasting it here) Anyway, back to DIY electric motors: I can't simply use two 10:1 reduction ratios (which would give 100:1 in total) simply because if I want to reach 30 rpm with...

HACKLET 17 – KEYBOARDS
Log from Hackaday.io Project
This week on The Hacklet we're featuring some of the best keyboard hacks from Hackaday.io!Hackers are really into their keyboards. Everyone has a favorite, and those favorites vary wildly. Mechanical, soft touch, ergonomic, QWERTY, DVORAK, chorded, you...

HACKLET 109 – COMPLEX 3D PRINTED PROJECTS
Log from Hackaday.io Project
If you can’t tell, we’re on a roll with 3D printers and printed projects this month. So far, we’ve covered printers, andsimple functional 3D prints. This week we’re taking a look at some of the awesome complex 3D printed projects on Hackaday.io.Complex...

Deciding A Platform
Log from Modular Tablet
After four months of continual silence from life getting ahead of me, I have had a chance to sit down and truly figure out what the platform will be based on (who got knocked out by me being in the quarter finals even though I resigned?). I had my original...

NeuroBeast v2 walks, enables simple (and quantifiable) gait development
Log from NeuroBytes
Firstly, the name isn't finalized. Any ideas? "NeuroBeast" is a bit lame IMHO. Secondly, a clip of the latest iteration dragging a battery pack across the demo rug:[Ingredients: Seventeen NeuroBytes v0.8 boards. Eight 9g servos. Eight 3D printed feet....

The Full Process
Log from Adventures in book binding
Sorry it took so long to update. I took these pictures long ago, but never got around to uploading them.Marking the center of a stack of paperCutting down said center lineMarking where the holes should goLine up one side and clamp the uneven sideDrill...

"Final" layout done.
Log from Point-to-point SMT Transistor clock.
After moving things around and building test circuits for just about forever, I think I've finally got a layout I can live with.I suppose I should put the binary files on GitHub or something.In the mean time, here's the schematic and layout for one flipflop.The...

Photo of the "spine"
Log from Point-to-point SMT Transistor clock.
Here's a photo of the "spine" with air wires. This took me about 30 minutes to solder.it seems fairly sturdy when I bend around on it, so I think it'll hold up.Next is to make the two outer three-component groups, attach them to the spine, and then........

Femto Satellites - A Rough Guide
Log from PQ60 - EPS
My goal for this project was to improve the exposure of PocketQube femto-satellites. These are 50mm x 50mm x 50mm satellites that have been very popular in the news for their extremely low cost to orbit. I want to add to the open source QubeCast Max...

The Wearable Synthetic Spine, and the School of Hardware Startup Hard Knocks - Lesson 1
Log from SynthaSense Suit: Control Stuff With Your Muscles
Long before Marvel Comic's Iron Man movie series came out, and before Iron Man's technological concepts in the comic pages even got a veneer of plausibility, long before anime became mainstream, I watched a lot of Mecha Anime, from Robotech to Appleseed....

Moving the Synthetic Spine Muscle Suit Forward
Log from SynthaSense Suit: Control Stuff With Your Muscles
I haven't been on site as often as I've been intensively getting a startup up and running, which happens to be a combination app/hardware startup. That said, I'm still messing around with the biosuit sensor device. Several things I want to add this time...

Sorry for the silence...
Log from Hard-cover Video Game Manual
I finished this months ago, and it works, but I did the binding poorly, and so the book doesn't work very well. I don't have the materials to redo this particular book, so it's going to be left in its present (working poorly) state.The mistake I made...

Designing In Rhino
Log from Invisible
After making the bottle-shaped iteration, I realized that it was possibly the ugliest sculpture on the planet. I decided that the more human-looking iteration was a much better direction, and I began to expand upon that one. The human looking iteration...

Enhancing the Body
Log from Invisible
Once I had the basic form of the body from the manikin, I started to edit and enhance it. The file looks a lot like a manikin, which makes sense, as it is a manikin. I want it to look like a more human form though, so I want to add arms. I thought a...

1
2
3
4
5
>
>|