10145 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

OS Upgrade and introduction of WiFi enabled device
Log from Open Indirect Ophthalmoscope
This log includes major upgrades included in the current system.Till now we had been using an older OS incompatible with RPi 3 since the display could have only worked with that image. Additionally it caused the trouble where the onboard or external...

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

Donor Cabinet work
Log from Star Trek: The Mirror Universe Pinball
7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

Purchased Hardware & Electronics
Log from Delta 3D Printer
In order to stick to my design goal of an AUD$1000 budget I decided to start a bill of materials spreadsheet. This would be a handy tool to keep track of budget and also allow me to show people if they wanted to try making something similar. Below is...

Day 1: Mechanism is good, no bubbles yet.
Log from Fan powered bubble machine
The goal for day 1 was to make a mechanism with LEGO studded beams and gears to convert speed from one axle (where the pinwheel will be) to strength at another axle (where the bubble wands will rotate). The mechanism completed on day one is a 1:36 ratio;...

Got X-Rays
Log from 100$ Xray desktop CT scanner
Got X-RAYS, yeah :-DIt works fine. I get a smooth nice green glow on the scintillator screens.It works with car engine ignition coils and an old radio tube (there are plenty of them on ebay, from 50 cents to 3€)

Putting all thogether
Log from Mini WiFi/BLE 4WD robot platform
When the controller and the housing are assembled the wheels can be placed. Therefore the gears with 8 teeth (6 pcs.) and 12 teeth (2 pcs.) need to get equipped with a brass axle. A 3mm brass rod can be used for this and will stick well in to the gears....

Plier stand
Log from How lions etch PC boards
Even better than PC board pliers is a stand for dunking them. Lions always used surface tension to float the boards on the acid, but this should eliminate air bubbles. Helas, the pliers now need a place to put a rubber band & a place to clamp onto the...

As the gear turns
Log from MultiBot CNC v2
Edit, fixed some bugs with the equations. --- For my rotary project I needed to 3D print a gear that would interface with a toothed timing belt. However when I tried to wing it and make one without doing any real research the belt did not interface...

[M] Hurdle hit for harmonic drive
Log from T^2 Tiles [gd0095]
Yesterday, I was thinking "I know how to model this" and started researching and modelling the new harmonic drive and looking for the components I want to use. I thought 14:1 was a good reduction, and it's coincidental because if I can get over...

[T] New Harmonic Drive Ideas
Log from T^2 Tiles [gd0095]
Looking at the current file, the Tile sticks out of the wall by 140mm. I think it's possible to reduce this to under 100mm. To do this, I need to design an even smaller harmonic drive, yet with high durability, low load displacement (high torsional rigidity)...

DC27 DOOM SAO - Hurt Me Plenty
Log from AND!XOR DC27 Badge
We’ve been lucky this year to have Cr4bf04m on our team, aka LonghornEngineer, aka Parker Dillmann. He shared our goal of the DC27 project to make the badges free during hacker summer camp. Aside from philanthropist backers and generous sponsors (Urbane...

Video/code Jam #7
Log from NSA Away
Video code jam #7 wrapped up last night with a flurry of productive activity. We shot the raw footage we need to edit into the five minute video and worked through a few last-minute integration issues with the USB OTG support and OCR. There...

Nr. 7 - Major breakthrough!
Log from Effect of moon phase on tombstoning
There was a little pause because we had holidays and went on vacation so I missed the last full moon (20220318), but there are plenty of parts left.Soldered Nr. 7 today - 20220320 - 18:27One resistor (the 360R one) didn't sink into the solder on one...

All systems are nominal
Log from LoRa darkStar
Finally, the timer chip and associated logic gates are working at all time intervals right across the full range. The timer and logic circuit is shown in the photo above and occupies a footprint of 20 x 15 mm. There's plenty of opportunity for a bit...

1
2
3
4
5
>
>|