26075 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Update #1
Log from Low amperage PCB switch for robotics
I ordered the PCB, and parts from Mcmaster Carrshould have everything in about two weeks to test .

Update #1
Log from Surface mount hot plate reflow controller
I ordered the last parts I need from Mcmaster Carr should have everything in a day or two.

A guide on powering Pi Zero directly from LiIon batteries
Log from ZeroPhone - a Raspberry Pi smartphone
At the project's beginning, when I was writing the "Features" section in the project's description, last entry was "Tons of Pi Zero-related hacks that were discovered along the way, that I'll share with you as the project goes =)". I didn't actually...

Update 191028
Log from PCB Strawberry Badge
Massive delays. I did not route with forethought, meaning that I2C pins have been allocated already. There are options that are equally bad, (1) Reroute everything and change the animation programming, or (2) bit bang I2C. Another set back is that I...

Donor Cabinet work
Log from Star Trek: The Mirror Universe Pinball
7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

Sophie Rises Up
Log from Home Robot Named Sophie
I have the budget to finish out the robot. I have the base aluminum panel, the 6 axis arm and the linear actuator/slide mech for the raising and lowering of the arm at ~12" with a future capability of 18". The arm raise mechanism took a lot...

Initial Checkout
Log from Intel SDK-85 Enhancements
What Is It?The Intel SDK-85 is a single board computer trainer from Intel. It is very similar to the MOS (later Commodore) KIM-1 in that it features a keypad and 7 segment display. 2K of ROM and 256 bytes of RAM are provided...

Topic 1: Fundamentals
Log from High Speed Digital & Mixed Signal Design
There is a major limitation with circuit schematics: 3 circuits (with the same schematics) may have significant performance differences which are a result of the physical layout of the circuits. Therefore it can be said that how a circuit is implemented...

Rev 1. PCB Assembly!
Log from CRAPi2040
Alright here we go! In case you missed the last log, here it is! Check it out because what you're about to see will make a lot more sense. Just like the last log, this log is going to be a retrospective, but I promise that the next CRAPi2040 log to grace...

Remote is complete!
Log from GloveCopter
1/2/13Today, I finished soldering everything onto the board. After the Arduino was on there, I tested the throttle joystick and IR LEDs to make sure everything was connected properly, and it was. Next was the accelerometer. I hooked it up and that worked...

The buildup 1
Log from seemingly reactionless drive, unbal. gravity wheel
Building manly everything from spare parts lying around. Starting with the base plate and some bearings.

Distractions
Log from HIGH PERFORMANCE ROBOTIC ARM
So I've made loads of progress with the design. I have changed the joints substantially and redesigned the base completely, this is after 3d printing most of the version 1 parts and seeing how everything looked together. After that I got very distracted...

It Survives Unplugging
Log from Raspberry Pi Wireless Print Server
The last step of setting everything up was really getting it settled in its final home. Behold our super fancy dust cover, which is just an upside-down Dollar Store bin.We're using accordion-fold labels that self-feed pretty nicely, and those and...

Plans & Hackaday Prize
Log from ICeeData
It's been a week since the hackathon ended. What are our plans for now?1. Build a GNU/Radio routine that'd capture the signal, apply all the filters that could be necessary and decode the data. There's a lot to be learned with GNU/Radio and RF in general....

|<
<
1
2
3
4
5
>
>|