2192 Results for "3D printing"

Rejuvenating my 12 year old 3D Printer
Log from RETRO 1 - Home Computer Console
I have an old 3D printer, an UP3D mini to be specific. It has a build volume of just 10cm x 10cm x 10cm. That's pretty small by modern standards.Additionally, the bed-heater is fixed at 60 degrees centigrade and in it's original factory state, it only...

3D-Printed Parts
Log from ROVER-X
My first assignment was to print the 3D needed parts. I used my Prusa MK3s and Red and Black PLA. I printed 'ALMOST' all the parts from the .stl files posted by Roger. However, I used some variations: Mirrored Parts: I printed the 4 corner...

3D printed waterproof enclosure
Log from SauronPi - autonomous Raspi camera
I decided to design an enclosure for this project for 3D printing. I want it to be waterproof, and functionnal. I'm finishing the design, but here is what it looks like : The box is parametric, and dimensions can be adjusted. In this version, it contains...

3D Printing Parts Instructions
Log from 3D Printed Raspberry Pi Security Camera System
I will try to be clear and concise in these instructions to help you have a successful print the first time. I have placed the pictures in the top bar in the order of the download on the Thingiverse page. I will also have the instructions and names in...

First exposing experiments with OpenExposer used as a component for a 3D printer
Log from OpenExposer
The first two pictures are showing the results of printing a 8mm x 8 mm x 2 mm cube. On the third picture you can see some of the first exposing experiments.

Making 3D Printed Enclosure
Log from SOLAR POWERED WIFI WEATHER STATION
Designing the Enclosure :This was the most time consuming step for me.I have spent around 4 hours to design the enclosure. I used Autodesk Fusion 360 to design it. The enclosure have two parts : Main Body and Front Cover The main body is basically designed...

3D printed enclosure
Log from Internet-of-Things Power Meter
To hold the IPM against the power meter I made an enclosure using SketchUp (with STL exporter) and my 3D printer.It only took me 4 iterations to make a box!The button on the bottom right has 2 functions: hold it down before turning on the IPM and it...

3d Printing, Rapid Prototyping and Farm Robotics
Log from Ufarm Robotix
This log will be a repository and notes for 3Dprinted parts that I have designed for use in the prototyping and even early small run production for the UFARM Robotics Project.Grow Light Hanging ClipThe grow light hanging clip was necessary to provide...

3D printed emergency collets
Log from My Edelstaal Machinex 5
While measuring the collets for the collet box build I had this silly idea; why not attempt to measure them as accurately as possible, and then make a 3d printed blank "emergency" collet? Plastic collet blanks are available so this is not a totally insane...

3. 3D printing
Log from Solar-Powered Tech Fashion - SolarCycle&Microsoft
There are jackets with solar panels on them currently in the market. But they all have the solar panels flat on the back. Does it actually collect enough sunlight when they are vertical? I wanted my solar panel to face the sun. Since this would make...

05/05 : 3D printing and planification
Log from Sonar Blind Project
We have printed our first piece, the shell that is going to protect the time of flight sensor. We are going to to need to work on the measures on each component to adjust the Arduino shell model, so we can finally print both of them.So today has mainly...

Finnishing 3d print and platform
Log from Lightsource for a microscope ringlight
So the 3d printing is finnsihed! It went quite well. The first print liftet up from the print bed a little bit. That made it bent but not a problem for the functionality of the print.Attached to the heatsink it worked like I wanted it to.Since I like...

3D Printing the Track - The Tedium ^^
Log from P.A.L. - Self Programming AI Robot
8 sets.... that is the number of times I need to print for the track. I am going to attach the file to the files location as soon as I am done. The file contains a single part for now. I will design and print the sprocket soon. Each of the parts is mounted...

3D Printed Frame DIY Drone build
Log from Makespace and Open Source Creativity
During the first week of March 2020, a few of us from Makespace and Open Source Creativity, decided to build a new DIY Quadcopter based on a 3D printed frame DIY Drone design (https://www.thingiverse.com/thing:2453393/files). After approximately...

New 3D-models
Log from FATCAT: Altoids Tin Mod Tracker
As I discussed in the previous log I've decided to modify the build to fit the speaker below the PCB, instead of gluing it to the lid of the Altoids tin. The first thing to do was to determine how much vertical clearance inside the tin I had...

|<
<
1
2
3
4
5
>
>|