18880 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

OS Upgrade and introduction of WiFi enabled device
Log from Open Indirect Ophthalmoscope
This log includes major upgrades included in the current system.Till now we had been using an older OS incompatible with RPi 3 since the display could have only worked with that image. Additionally it caused the trouble where the onboard or external...

WiFi issues resolved
Log from Wink Hub Hacking
I have had nothing but trouble getting the hub to connect and stay connected to my wireless router. I recently figured out the cause. I had placed my hub about ~5 ft from my router, and evidently that was close enough to saturate the hub's wifi radio....

Update. And a Warning...
Log from Custom Christmas Light Display
My strings of GE Color Effects are quite old - purchased in 2010. Evidently in the past couple of years, they have changed the lights to a style which is not hackable. The new lights have 2 wires per bulb/pixel (one in, one out), which provides...

The official solution
Log from Megsy? A homebrew Teensy 3++
So I asked about this in the PJRC forums, and evidently Paul has made a board available from OSHPark here:https://www.oshpark.com/shared_projects/d3J03ZebTheir bootloader chips are available here:https://www.pjrc.com/store/ic_mkl02.htmlIt's still missing...

Bringing Up GDEY042T81-FT02
Log from FLOSS Book Serving System
I'll skip to the happy ending. I can drive the display, the back light, and can read data from the touch screen, but achieving those milestones took much much longer than it should've. This update won't have much info on the actual e-reader project but...

Aussie Sawppy - Dumb things I did
Log from Aussie Sawppy
So I finally have the software sorted and I can "drive" the servos on the kitchen table by logging onto the Pi's network with my smartphone. A eureka moment of sorts! . I pause here to thank @Roger for responding with generosity and verbosity to my requests...

Chains, sprockets, shafts and bearings
Log from Woody the Electric Four Passenger Bicycle
woody is using BMX cranks because they allow very small sprockets. Below is one of two assemblies before welding. The bottom bracket was turned on the lathe, and the two plates were made by sendcutsend. And here it is bolted in place. The holes...

A guide on powering Pi Zero directly from LiIon batteries
Log from ZeroPhone - a Raspberry Pi smartphone
At the project's beginning, when I was writing the "Features" section in the project's description, last entry was "Tons of Pi Zero-related hacks that were discovered along the way, that I'll share with you as the project goes =)". I didn't actually...

Released and ordered
Log from Microwavino
Today I finished project design and sent everything to fabrication. I ordered PCBs from OSH Park (5$) and kepton stencils from OSH Stencils (8.45$ with shipping). I expect to get everything ready for assembly in next 20 days. Till then, over and out!

Update 191028
Log from PCB Strawberry Badge
Massive delays. I did not route with forethought, meaning that I2C pins have been allocated already. There are options that are equally bad, (1) Reroute everything and change the animation programming, or (2) bit bang I2C. Another set back is that I...

Donor Cabinet work
Log from Star Trek: The Mirror Universe Pinball
7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

Initial Checkout
Log from Intel SDK-85 Enhancements
What Is It?The Intel SDK-85 is a single board computer trainer from Intel. It is very similar to the MOS (later Commodore) KIM-1 in that it features a keypad and 7 segment display. 2K of ROM and 256 bytes of RAM are provided...

5-6th sceances
Log from Battle boat Game
We finished coding the laser, the photoresistors and the leds. We printed the gear and start installing everything on the board.

It Survives Unplugging
Log from Raspberry Pi Wireless Print Server
The last step of setting everything up was really getting it settled in its final home. Behold our super fancy dust cover, which is just an upside-down Dollar Store bin.We're using accordion-fold labels that self-feed pretty nicely, and those and...

1
2
3
4
5
>
>|