14952 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

OS Upgrade and introduction of WiFi enabled device
Log from Open Indirect Ophthalmoscope
This log includes major upgrades included in the current system.Till now we had been using an older OS incompatible with RPi 3 since the display could have only worked with that image. Additionally it caused the trouble where the onboard or external...

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

Early notes
Log from CalendarClock
This is retroactive notes, based on memory of this project Here is an early test (april 2019) done with the gear changer. At that point I presumed a single axis could hold the gears, but there was too much play up/down so the later design holds the gears...

Gear ratios
Log from Crazy Clock
I'm going to label these two gears of interest the "inner" and "hour hand" gear. The hour hand gear is the one with the stem riser that winds up accepting the hour hand. The inner gear meshes on its outside edge with the minute hand shaft and on the...

Purchased Hardware & Electronics
Log from Delta 3D Printer
In order to stick to my design goal of an AUD$1000 budget I decided to start a bill of materials spreadsheet. This would be a handy tool to keep track of budget and also allow me to show people if they wanted to try making something similar. Below is...

Day 1: Mechanism is good, no bubbles yet.
Log from Fan powered bubble machine
The goal for day 1 was to make a mechanism with LEGO studded beams and gears to convert speed from one axle (where the pinwheel will be) to strength at another axle (where the bubble wands will rotate). The mechanism completed on day one is a 1:36 ratio;...

Got X-Rays
Log from 100$ Xray desktop CT scanner
Got X-RAYS, yeah :-DIt works fine. I get a smooth nice green glow on the scintillator screens.It works with car engine ignition coils and an old radio tube (there are plenty of them on ebay, from 50 cents to 3€)

Measuring Magnetic Fields in a Volume
Log from low-field MRI
Let's have a look at the first test rig for measuring magnetic fields over a 3D volume.I confess that I've been thinking about this for a few weeks, and it's been a fun (and sometimes frustrating) design process. We'd like to accurately map the magnetic...

Putting all thogether
Log from Mini WiFi/BLE 4WD robot platform
When the controller and the housing are assembled the wheels can be placed. Therefore the gears with 8 teeth (6 pcs.) and 12 teeth (2 pcs.) need to get equipped with a brass axle. A 3mm brass rod can be used for this and will stick well in to the gears....

Schematic and PCB layout
Log from Core 64: Interactive Core Memory Badge
I'm cutting my teeth in KiCad and have the schematic created and the board outline getting ready for routing. Latest state of the files are updated in GitHub.I need to review the schematic and footprints closely before diving into the layout. I'm excited...

Plier stand
Log from How lions etch PC boards
Even better than PC board pliers is a stand for dunking them. Lions always used surface tension to float the boards on the acid, but this should eliminate air bubbles. Helas, the pliers now need a place to put a rubber band & a place to clamp onto the...

5/8/23
Log from Color Spectrum of Feelings
We settled on our spectrum design. Our 3d printer isn't big enough to fit the whole 3d box so we had to print it in two pieces. We waited to print both pieces until we decided on our final build. When we tested our servo moving across we found that the...

[M] Hurdle hit for harmonic drive
Log from T^2 Tiles [gd0095]
Yesterday, I was thinking "I know how to model this" and started researching and modelling the new harmonic drive and looking for the components I want to use. I thought 14:1 was a good reduction, and it's coincidental because if I can get over...

The End Game
Log from MPRT - Modified planetary robotics transmission
The End GameA project has to have an "end game" to steal the concept from Chess. There comes a time not to "chase the rabbit down the hole".While laser cutters are very precise, they still have the same accuracy issues common to CNC mills.Accuracy versus...

[T] New Harmonic Drive Ideas
Log from T^2 Tiles [gd0095]
Looking at the current file, the Tile sticks out of the wall by 140mm. I think it's possible to reduce this to under 100mm. To do this, I need to design an even smaller harmonic drive, yet with high durability, low load displacement (high torsional rigidity)...

1
2
3
4
5
>
>|