23995 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

OS Upgrade and introduction of WiFi enabled device
Log from Open Indirect Ophthalmoscope
This log includes major upgrades included in the current system.Till now we had been using an older OS incompatible with RPi 3 since the display could have only worked with that image. Additionally it caused the trouble where the onboard or external...

Initial Power Up
Log from PIXI Analog Shield
I found 2 wrong schematic symbols, which got fixed on the rev 01 board with 1 deadbug IC and one that was not required for regular operation. The interested observer will find those fixes in the image of the board.

X dro head mounted
Log from Reviving a Shoptask 1720 XMTC Gold 3-in-1
tight fit with regular cap screws underneath. I don't have any 4mm button-heads.

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

Design Considerations
Log from Open Indirect Ophthalmoscope
Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

Improved PCB ESPboy.pro v2.1
Log from ESPboy - RetroGaming&Software development MuliTool
ESPboy.pro v2.1 improvements. The PRO version is rather complicated and i think it will be sutable only for hardcore geeks :) For regular users it's better to take EDU version! 1. 2 side buttons added for more comfortable horizontal usage 2. Micro...

And... Done?
Log from Breadboarded 3-Axis Sine-Cosine Controller
Schematics and code are posted in the Files section. Had a dial indicator attached to an X axis cobbled together with regular threaded rod, with my PC moving it to and fro. The GCode had it moving +/-0.1 inches, and that is what it did. I'll check back...

Challenges for this project
Log from Trinket Pedometer
This biggest challenges for the project are : 1) How do I keep the size small and at the same time keep it functional as a regular pedometer ? ( The last thing I want is a huge box hanging off my belt loop 2) How do I power/recharge the dang thing...

TENS and Active Healing
Log from CastMinder - The Cast and Splint Monitoring System
The Transcutaneous Electrical Nerve Stimulation (TENS) unit is an integral part of the CastMinder Active Healing system. Regular TENS units work by providing relatively high voltage (approx. 50v) pulses to the skin through electrodes. These pulses are...

Bellow's Mechanism Functioning!
Log from Voight-Kampff Machine
After a much experimentation, much of it making overly complicated mechanisms, I finally went back to basics and tried using a normal regular servo to move the bellows. I'm not sure why i didn't try it first but I think it was because of difficulties...

G28 - Homing
Log from X printer - portable
Here is a video of the homing procedure. X and Y are homed sensorless and Z with an regular endstop. With the help of Uzair Patel I was able to solve the non-linear Z-Axis firmware problem. I decided to use marlin 1 instead of marlin 2, because marlin...

X-Axis
Log from OpenLRC - The low cost linear rails CNC
The x Axis is the exact same as the regular Spinx. I printed the plates in Black Amazon basics Petg with 5 perimeters and 100% infill. I used 3d printed rail aligners to temporally install the linear rails. Im using MGN12H knockoffs off alibaba....

RSID Adventures
Log from SIDman player
Before i could get started it was imperative that i looked at the golden target. The playing of RSIDs and what makes them so special compared to the regular SID music referred to as PSIDs. Most projects around SID playback make assumption on how they...

Original page from my notes from April 1994
Log from ASCIICHORD
If you understand Russian handwriting you can read original design from my notes from April 1994: At that time it was 1 extra button "agree", but now I decided to remove it to make process of entering faster - anything wrongly entered always could be...

Main circuit almost complete
Log from Ultra-Portable Sustainable Electric Generator
see gallery for schematic, more pictures to come. circuit diagram does not show potentiometers: there are two, attached to voltage regulators. I finished drawing out and assembling the main circuit, except for the linear voltage regulators and toggle...

1
2
3
4
5
>
>|