2175 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

BitBeacon Stops Working When Outside
Log from Bit the RoboDawg
Wednesday, June 8, 2016Tested Bit outside. It appears the BitBeacon stops operating outside. Not sure why. We have used outside plenty of times. We did make a very minor modification to Bit since the early Bit demos at night, but still..... Anyways,...

Features in the acrylic.
Log from Webot
Square shaft Round holeGetting the gears to press fit on the shaft was a 6 month endeavor. I was using 2 and 3mm round shafts because I wanted to use an off the shelf 0.5M gear to dock with the gear on the motor. Unfortunately, if I glued...

CFRP arrived, build starts this weekend!
Log from GimbalBot
Everything arrived, including the 8' long tube stuffed with bubble wrap and CFRP square tubing. Exciting! Two CAD model changes to make prior to getting out the carbide-tipped jigsaw and Space Glue:1) I'm going to increase the width of the pitch ring...

Low Signal Stength
Log from Super Simple MW/AM radio circuit
Low Signal Strength?I assembled the two transistor reflex circuit:I went with this design as I have built it before and it works.I did model this circuit in the simulator and the Ge diode can be swapped with a silicon (the diode bias current is about...

Rev 1. PCB Assembly!
Log from CRAPi2040
Alright here we go! In case you missed the last log, here it is! Check it out because what you're about to see will make a lot more sense. Just like the last log, this log is going to be a retrospective, but I promise that the next CRAPi2040 log to grace...

Project Log 64: DIY Linear Actuator.¹
Log from DIY Mech/Exoskeleton suit.
21/07/2023, Friday, 10:16. For some reason this last week got me too lazy to do anything at all... Well, I will just leave this here and see what I can think of... ----------------------------------------------------------------------------------------------------------...

Yihua
Log from Shenzhen - Bao'an electronics markets made easier
English NameYihua Electron SquareChinese Name益华电子广场Google Maps linkhttps://goo.gl/maps/3HYA11jVvp32Baidu Maps linkhttps://j.map.baidu.com/bDWJZSubway Station后亭站 (exit B) The first market I'm going...

What to do... Hmmm?
Log from Square inch Raspberry Pi display
I sat around thinking about what I useful thing I could build in one square inch of PCB, I decided on something with blinky lights or a display. Further refining the idea, I settled on a minimalist display for a Raspberry Pi.Hmmm, this might just work....

Frame Update | Totem!
Log from Digibone
After re-purposing some of the extrusion I ordered for this project to build a frame for my son's room I was back to the drawing board on this one.I was planning on ordering some more, but then stumbled on a company called Totem, who specialise in mechanical...

Square Inch entry!
Log from DRM-114
It turns out that the first iteration of the hardware meets the criteria for the Return Of the Square Inch contest!This may be cheating just a touch. It depends on your point of view. What I refer to is the need to connect the board up to some sort of...

Frame Assembly Part 3
Log from CNC in a box
I basically finished the assembly, although there are still some hard points that needs to be solved. The pieces for jointing are square but I missed my measurements in some area by a couple of mm. Making bigger bores for the screws seemed to make it...

Y Axis
Log from CNC Plasma Table
The Y axis linear guides do not use the plastic wheels of the original design. They now use rubber coated wheels. The wheels were made from a couple of rollers that were cut down. The ends were faced off to length in the lathe with a center hole opened...

Fundamentals of RF HackChat Transcript
Log from Fundamentals of RF Hack Chat
Sophi Kravitz : HI everyone, we're going to get started Sophi Kravitz : @Nick, welcome to the chat! Nick : Hello everyone! Sophi Kravitz : Can you introduce yourself and tell us a little about the kinds of things...

We don't need no stinkin' DAC
Log from $1/W True MPPT
Nor do we need ADCs either none.I want a cool hat like that!Turns out, with some clever wizardly, I figured out a way to get rid of the DAC and the ADC to make this MPPT power supply. "How and why" you may ask? Let me start with the why.My current implementation...

Construction
Log from Stuart Conner's Simple TMS9995 board build
2020-04-25 Soldered on the simple 9995 board: U1 TMS9995 socket U2 ROM socket U3 32K RAM U4 74LS04 U5 74LS32 U6 MAX232 socket - omit because using FTDI cable U8 74LS138 C10-14 omit because using FTDI cable U2 ROM socket U3 32K RAM U4 74LS04 U5 74LS32U6...

1
2
3
4
5
>
>|