2676 Results for "《 예약문의 OIO↗8489↗8306》가라오케┦가라오케world선릉가라오케가라오케사이즈청담가라오케promotion 선릉가라오케┫ ∫선릉가라오케decided"

First unit in Arizona, USA
Log from Global radiation monitoring network
It’s time for the West side of the US to be featured here with this new uRADMonitor unit joining in from Arizona. Live data can be seen here.Here is a quick comparison on its current measurements, and the initial ones before sending the unit:At its new...

Observations on diurnal indoor variations in gamma ray count rates
Log from Global radiation monitoring network
Richard Prettyman, August 2014BackgroundA close correlation between gamma count rate at ground level, and soil derived Rn-222 flux has been demonstrated in work which has also studied the effects of meteorological and diurnal factors on Rn out-gassing...

Powering uRAD Monitors via PoE
Log from Global radiation monitoring network
Jeff wrote a comprehensive guide on how to add POE to uRADMonitor devices http://www.uradmonitor.com/powering-urad-monitors-via-poe/When I received my URAD Monitor, I was trying to think of the best placement where it would satisfy the requirement to...

Ocean Test No. 3
Log from SolarSurfer
8/8/14-8/9/14 - This test is a big deal. Over the course of almost 24 hours, the SolarSurfer traveled approximately 20 km in the open ocean, miles off the coast of Los Angeles. We were fortunate enough to have access to a boat for this test. We took...

#WorldCreateDay #Adelaide #IoT #Hackathon
Log from Hackerspace Adelaide
#WorldCreateDay #Adelaide #IoT #Hackathon was a great event thanks to everyone involved .http://hackerspace-adelaide.org.au/blog/2016/04/24/adelaide-iot-hackthon-2016/

Weigh Scale Error Analysis
Log from Honeybee Hive Monitoring
In any implementation of an ADC, there's going to be some error to the measurement. In many cases, the error is primarily due to the resolution of the ADC so it's safe to assume that the error in the measurement is plus or minus half the ADC resolution....

Explore NFC Layout
Log from OURTicket
Here is the traced out SPI/comms configuration for the NXP Explore NFC RasPi board:On the board are 0-ohm resistor links to reconfigure as I2C. I have marked where appropriate, the connection pads for these. The header here corresponds to the this image....

1.3 Multiple Relays
Log from Obtain.Today
Picked up another 2 relay switches to bring the total to the required 24. This is simply a small test to ensure that they all work when connected in tandem and there is no power issues. All is well with this stage. The large SnackShop 6000 was finally...

Testing out the Ballscrews with circles
Log from Grizzly G0704 CNC Conversion
Circles are hard to measure, and hard to cut. I have specific tools just to measure circles telescoping gauge and tools to help cut them on the CNC boring bar . But cutting them out as circles from GODE is a good measure of how well the CNC performs...

working with libmodbus
Log from Grizzly G0704 CNC Conversion
interfacing to libmodbus is fairly straightforward. i'm leaving out the error checking and what not, since the whole code is on githubopening a connection modbus_t *ctx = modbus_new_rtu ( "COM1", 9600, 1,8 ,1); if ( ctx) { if(modbus_connect ( ctx ) ==...

Making it "truly" mobile
Log from Diabetes Data, Everywhere
After getting a taste of what and how amazing remote monitoring our son's blood sugar was... we wanted to extend this to 24/7 coverage, from anywhere he may be.A tool like this enables a child with diabetes the ability to: play without unnecessary interruption,...

The Logic behind
Log from AstroScopus
In this project log I want to explain the logic behind the operation of the astroscopus. Bellow is a flowchart with the operation mode of the device. These are my preliminary ideas that can change with the progress of the project.On power up the device...

1st AFK meeting @ the CUTing Edge venue in Limassol (21/07/2014)
Log from Limassol Hackerspace
On Monday 21/7 we had our first ever official AFK meeting as a Limassol Hackerspace community. In this first gathering we presented our hackerspace vision to a large group of people who were curious enough to attend the event and learn more. More importantly...

Firmware Update
Log from Wireless Smarthome Buttons
In the last couple of weeks getting ready to shoot my demo video and running multiple button pads for the first time as well as some significant firmware updates from the SparkCore team i’ve cleaned up the firmware code a lot. It’s almost a re-write...

Test Code
Log from Modular Nixie Display
/* * Test File for Modular IN12A Nixie Display Boards * Works with Arduino Uno. * * By: Johnny Izzard */ #include #define LD 10 #define CLK 13 #define SDO 11 #define PWM 9 #define tube_off 10 #define ind_off 3 uint16_t decimal_lookup[11] = {0x0001, 0x0002,...

|<
<
4
5
6
7
8
>
>|