420 Results for "N 온라인손오공게임 CDDC7닷컴 ◆프로모션번호 b77◆용산카지노㈣월드컵예선경기생중계ᇭ하노버ᇡ토토신🍋온라인손오공게임강추 luniform/"

Inventory n°2
Log from Yet Another (Discrete) Clock
So far we have the following elements :Power-On Reset: a few parts (1 N-FET, 1M, 10µ, 1 diode)Oscillator : a few transistors, maybe a dozen of parts. Parts count and power draw are not significant because it's only one circuit.Divider: 15 stages...

Tracking down /n newline bug
Log from Pablo
I am finding responses hang where more than one type of command is sent to Pablo.For instance, in the following example when the phrase "red eyes" is heard. Pablo receives the rgb led command and is supposed to speak but instead hangs. This is true for...

Design challenge n.11: Watchdog
Log from Green BMS
Microcontrollers can crash. This can happen for sketch mistakes, but also for failures in the microcontroller itself... so it can happen. When this happens, the outputs remain frozen at the last value and this led me to an important question: What would...

Testing PWM with LED strips and N-FET construction
Log from RGB WIFI Dimmer
Today I tested the N-FET construction with small pieces of LED strips. With all four PWM channels, all of them have around 500Hz an can have any duty cycle. The main result of this test is, that I have to choose other values for the pull-up resistors....

A Good Use of Time
Log from Yapolamp
Sorry, no pictures this time but perhaps the news that the Yapolamp code is "done" enough to warrant its own Github repository is exciting enough to make up for that!So, after trying a variety of approaches, I now have the main software features implemented:Short,...

The brain of the thingy
Log from Open Z3zzvw3
This was the time to give a brain to the thingy, in other words how to control the thing. My first approach was to create a web browser, running in the arduino based on the example of the enc28j60 library. I wanted to press a button on a webpage, set...

27/09/2016 V 0.1a - IRLB8721 arrived.
Log from Arduino assisted night time bed light
Today via post I received my three IRLB8721 N-CHANNEL mosfets, later on I'll connect those to my led strip..to be continued...

Combining inputs and outputs
Log from Sonic Screwdriver
This is a table with some possible combinations for the sonic screwdriver.Menuinputoutputcombination resultDAZZrgb led, white ledRandomized switching of the LEDs like in the link - a non lethal weapon a doctor may approve. http://hackaday.com/2009/09/28/open-source-weapon-makes-you-puke/MAESTROaccelerometerrgb...

Inventory
Log from Yet Another (Discrete) Clock
Let's estimate how many transistors are required for this clock project.So far we have the following chart :Inverter : 2 TNAND, NOR: 4TOR, AND : inv+Ngate= 6TD-FF: 16TActually the whole system is mostly made of D-FF:Each of the 15 stages of the 32K predivider...

Floppy drives
Log from STEbus Z80 and FDC
2023-01-15 The rack-mounted drive is an NEC FD1035, taking 2W on each of two power rails. Therefore 12V is 2/12 = 0.167 amps, and 5V is 2/5 = 0.4 amps. The drive of unknown provenance is a TEAC FD235HF which requires only 5V at 0.8 amps peak, i.e. 4...

Wiring - two steps forward, one step backward
Log from Thumb Term
I just finished wiring up the keyboard and 5-way switches and wrote a bit of micropython code to test them. None of the 5-way switches are working, but all of the front keyboard buttons seem to work! I'm not sure, but I must have wired the...

Swag time: blue LED and logos on copper
Log from JACK
Hey there,Quick update before leaving the office: I just added a nice LED connected to pin 32 and very neat logos on the top copper layer.Of course the LED will be blue because blue is cool and there's the Skull n Wrenches logo because that's even cooler!Every...

Modify the Router
Log from Friendly Neighborhood Hotspot
Remove the existing antenna. The idea is to put on a jack so I can connect antennas myself. Since N type connectors seem to be the go-to these days, here's my fancy hack job.The existing antenna line was removed and wired to the connector instead. Still...

Whoops!
Log from Light Alarm Arduino Shield
Turns out that I wired up my power MOSFETs wrong, so PWM doesn't really fade the LEDs at the moment. I was using an N-Type MOSFET and a P-Type wiring. Silly me.But not to worry! I switched the wiring around and sent it off to be made again! You can also...

The test bench
Log from The World Is Mine!
To develop the hardware and software part of the project, I assembled a small test bench on a wooden base. It is composed by: • n.1 Switching power supply 5v 30A • n.1 breadboard with ESP8266 Wemos Mini card and buttons • n.8 8x8 WS2812B RGB led matrix...

1
2
3
4
5
>
>|