12981 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

November 2014 - Designing a prototype source pt. 3
Log from Low Cost X-Ray Systems for Developing Nations
Around the end of October, I finished up the design of all the plastic components which would house the electronics of a 200W x-ray system. It was now time to design those electronics!Back in September, I had an idea of how I should go about doing this....

Everything Uploaded
Log from Highly Configurable 3D Printed Helmholtz Coil
Everything is now online for the project, completing the build of a 3 Turns x 30AWG 21cm coils and onto testing.

The official solution
Log from Megsy? A homebrew Teensy 3++
So I asked about this in the PJRC forums, and evidently Paul has made a board available from OSHPark here:https://www.oshpark.com/shared_projects/d3J03ZebTheir bootloader chips are available here:https://www.pjrc.com/store/ic_mkl02.htmlIt's still missing...

Bringing Up GDEY042T81-FT02
Log from FLOSS Book Serving System
I'll skip to the happy ending. I can drive the display, the back light, and can read data from the touch screen, but achieving those milestones took much much longer than it should've. This update won't have much info on the actual e-reader project but...

Module 1/TCD1304AP Complete/Module 2/AD7667 Complete
Log from DAV5 V3.01 Raman Spectrometer
Well exactly 98 man hours later, (avg. 14hrs per day*7,) and These are the 2 primary modules and I included the CLI (communication link interface) I had to make this so I could connect the CCD module with the ADC module.This is the CCD module (1) This...

Chains, sprockets, shafts and bearings
Log from Woody the Electric Four Passenger Bicycle
woody is using BMX cranks because they allow very small sprockets. Below is one of two assemblies before welding. The bottom bracket was turned on the lathe, and the two plates were made by sendcutsend. And here it is bolted in place. The holes...

Donor Cabinet work
Log from Star Trek: The Mirror Universe Pinball
7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

Topic 1: Fundamentals
Log from High Speed Digital & Mixed Signal Design
There is a major limitation with circuit schematics: 3 circuits (with the same schematics) may have significant performance differences which are a result of the physical layout of the circuits. Therefore it can be said that how a circuit is implemented...

Reliable Performance
Log from Car Battery Monitor
A short update to say this project has now been continuously live behind the front bumper of my car for 8 months now and has survived everything the weather and the cars electrical system has thrown at it.

8/3/18 - Boards Arrive
Log from SAMD V2 Fusee Payload Injector
After a bit of weather delay in transit, boards for the SAMD Loader have arrived! Everything looks good, time to start programming the pick & place

Automatics!
Log from N.I.T.E (Nissan Industries Two Eighty)
Automatic windows are installed -- everything still needs to be cleaned up and the doors need to have the interior piece fabricated -- but the electronics work, and that's the important part!So to date:1. Automatic Locks = Installed2. Automatic Windows...

Aw Nuts!
Log from TOME - Portable 3D Printer
Before prototyping the second half of the Z-axis clamshell I was waiting for a McMaster order to arrive. Today it came and I was able to get everything to fit, primarily for a form/fit/function verification. Now that I know everything fits appropriately...

Ditching the Blue Box
Log from smoothieware-powered 6040 CNC Mill
I tried to work out how to fit all the components inside the blue box, but decided that it was just too crowded. Instead, I am going to mount everything on a 24" x 12" wood backboard. Also will make two aluminum panels, one...

1+1 Does Equal 2 !!!!
Log from Mega-One-8-One
Found some time this evening to hook up the Mega-One-8-One for testing. The Mega-One-8-One is a gate level accurate replicate of the classic 74181 Arithmetic-Logic Unit(ALU) for educational purposes. With the exception of one LED not being soldered...

1
2
3
4
5
>
>|