Close

9983 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워㏃ ㏐addition쓰리아워Ⅶ강남술집정보강남술집정보O Ч강남술집정보exhibit 강남쓰리아워к강남술집정보㎼Ŋmethod"

  • April 12, 89 PD

  • CAD work and fabricator begins today. It is our hope to start piecing together the first parts this afternoon. It is going to be a long push up hill from here, but we do not have a scope change, yet. As soon as we have the first parts done we will start...
  • Frequencies

  • For some reason the 47 pF value for the caps is sitting in my mind. Either after 'calibration' the LC meter is so far off that it read both my TI-89's and my V200's caps 51 pf, both ~8% high, or both of them are within their 10% tolerance and reading...
  • We get signal

  • Indeed, immediately after running the Windows software in a VM with the device connected I was getting a live data log of the CO₂ concentration! This screenshot shows me breathing into the vicinity of the sensor:Ok, time to disconnect the device from...
  • Fibonacci

  • With the ALU verified and the RAM connected, today the breadboard determined that the first 8-bit Fibonacci number is 144. 0000 0000 ld $00 ; outer loop 0001 c200 st [$00] ; a=0 0002 0001 ld $01 ; b=1 0003 fc0a bra $0a 0004 0200 nop ; (pipelining) 0005...
  • Log #89 - CondomBoard specifications

  • Size: about 50x50mm (size of condoms I have, could be a little larger if required)Layers: preferrably a single 2-layer PCB, for easier ordering at the usual suspects in ChinaConnections: debug UARTMicroUSB for charging the batterytemperature sensor connectortwo...
  • Housing selection

  • Requirements Easily found when misplacedBig enough to hold easily but not too big that it's cumbersomeShould have a battery compartment so that unskilled personnel can replace batteries without having to open up the housingRoom enough for the necessary...
  • MIKBUG Commands

  • MIKBUG (Smithbug) has the following case-sensitive commands. ; V VIEW MEMORY; E CHANGE MEMORY; M MOVE MEMORY; I FILL MEMORY; F FIND  ; D DISASSEMBLE CODE; & S1 LOAD PROGRAMME; G GO TO PROGRAM; J JUMP TO TARGET PROGRAM ; T TRACE PROGRAM; K CONTINUE...
  • FlexSEA-Plan

  • FlexSEA-Plan is an embedded computer used for high-level computing. It boasts a powerful processor and can run an operating system such as Linux. Developing code on this platform is similar to the regular (i.e. non-embedded) software development process....
  • Diving in with Calamity and Confusion

  • On my TI-89, one of the battery contacts on the PCB was heavily corroded and it took a good deal of time and heat to reflow solder to make a new pad. I did this to the V200 as a preventative measure too, but I guess I heated up the nearby fuse to where...
  • The 2019 PiDP-8

  • It's already out since July, but just to log the improvements:There's actually a lot to learn about kit-making: how to prevent beginners from messing up soldering a computer kit for the first time. So it was time for a revamp of the PiDP-8, putting in...
  • Tapo circuit COMPLETED! + Tested + Programmed

  • //----------------------------------------------------------------------------------------------------- // LIBRARIES //----------------------------------------------------------------------------------------------------- #include #include #include //-----------------------------------------------------------------------------------------------------...
  • Mystery of Green and Blue light

  • I know the title sounds really mysterious, but just have a look at the gathered data.(Date Time R_max R_min G_max G_min B_max B_min Ir_max Ir_min)2014/8/23 0:39:55 55 49 1 0 1 0 25 22 2014/8/23 0:59:1 84 73 2 1 1 0 47 41 2014/8/23 9:7:35 97 87 3 1 2...
  • Deep Sleep

  • I've been testing the deep sleep mode on the ESP-03. I loaded the frankenstein firmware from here https://github.com/nekromant/esp8266-frankenstein onto the module to test the deep sleep mode.Note, you need to tie gpio15 to GND in order to boot any firmware...