Close

11383 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

  • Design
  • Log     from DIY Digital Caliper
  • From the image above you can see the front, the back and the t-scale for my caliper. Bellow I will list a few things I considered while making this design. I chose the STM32F103 used in the blue pill because it is capable, cheap and schematic is...

  • False Starts, Change of direction?
  • Log     from Uno 14500
  • I've been busy working on the PCB and routing on the computer, but while I'm getting much quicker and better at it, I've ran myself into a corner. We're gonna need a bigger board... This project is one of odd anachronistic design choices, pulling in...

  • Measure twice or thrice or....
  • Log     from The Tile Job
  • In this project log entry, I'm recording various measurements so as to have them all in one place instead of the zoo of tiny slips of paper where I have previously recorded them. Some measurements will only be determined after I have done some demolition,...

  • On the eve of destruction
  • Log     from The Tile Job
  • Or, rather, the day of. This is how it starts: And this is how it (almost) ends: I still have to take the backing off the other two walls and then trim up all around. I found out some interesting things during demolition.  First of all, as far as...

  • Plumbing day
  • Log     from The Tile Job
  • Now it's finally time to replace the tub and shower combination faucet. My motivation for the replacement is (a) to move from separate hot and cold controls to a single handle, and (b) move from ancient rubber washer technology to modern washerless goodness....

  • Niche space
  • Log     from The Tile Job
  • There is a small amount of open space behind the pre-made niches. It's not much, but you can feel a little flex if you push on the center of the niche back walls. Perhaps I am overly cautious, but I don't want that small amount of flex to lead to loosened...

  • Return to Niche Mountain
  • Log     from The Tile Job
  • Finally, I've put a little mortar to work, so the tiling is truly underway. I started with the niches, but first I have to confess.  Two of my specialties in projects like this are changing my mind and making obvious blunders. My original plan for...

  • First row up!
  • Log     from The Tile Job
  • Today, I set the first row of the back wall. I even did that thing where I used the trimmed off piece to go around the corner to the next wall.This row took extra time because I had to make that U-shaped cut-out in the middle piece of the back wall to...

  • LPC1756 prototypes
  • Log     from Hardware 2FA TOTP authenticator
  • When I started this project I first made several prototypes to test all the features of the LPC1756. The first prototype was to make sure I could power up the LPC1756 and connect using JTAG and SWD.After the first basic prototype I made a small...

  • TOTP Screen
  • Log     from Hardware 2FA TOTP authenticator
  • As I would like to carry the authenticator around I wanted to make it as small as posible. This decision removed quite a few screens to chose from.  The screens I was thinking about were: * SSD1351 * SEPS525 * 80x160 ST7735 * 135x240...

  • The first one!
  • Log     from Anwaar Amulet - The story so far
  • Project Log #1 Little sparks for a gift - sometime in 2019 I think. When I moved to colorado about 5 years ago I got a job in PCBA assembly. It sparked a lot of on and off the job learning about circuit boards and their manufacture. In another lifetime...

  • Pulse counting interrupt

  • Log     from Battery powered LED pulse counter
  • The ESP32 has an pulse counting peripheral which would ideal for counting the LED pulses on a electricity meter, unfortunately it does not operate in deep sleep so will consume to much energy to allow for a decent battery life.Instead I plan to configure...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday