6163 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

Design Considerations
Log from Open Indirect Ophthalmoscope
Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

Donor Cabinet work
Log from Star Trek: The Mirror Universe Pinball
7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

Sprockets
Log from Modular Continuous Track System
Now that I am cranking out the treads at a much faster rate, I need to start looking into testing this design out. That means building a tracked robot. Because my goal is to test out the modularity of the system, I actually want to test out many different...

Down the Rabbit Hole
Log from MPRT - Modified planetary robotics transmission
Optimisation of the Original MPRT So okay, I decided to see if I could optimise the original MPRT. Not a trivial task, but doable with brute force: For each Pressure Angle (PA) from 15 degrees to 25 degrees in steps of 1 degree.For each Diametral Pitch ...

Experiment in Wheels: Part 4.
Log from Micro Robots for Education
Hello, So it seems the core issue in this project is how to reliably make the wheels. The resin 3D printer I used before made some ok wheels, though the tolerances where not reliable, also as the optical path became foggy the quality of the teeth degraded....

First Experiments - March, 2021
Log from E-TKT: anachronic label maker
Using Arduino mega, communication via serial.Carousel homing with infrared sensor + one missing “teeth” led to inconsistent results and misalignment.Testing with SG-90 servo, but it was too weak to press the tape.

Weatherproofing completed! :)
Log from Propel-E 450 | A very powerful windturbine
No wind and a sunny day here in Belgium, ideally to work 6m height to install the new parts on the windturbine!The new bearings that are more waterproof, showcased on the axle that is now only 30mm diameter instead of 35mm which should still be plenty...

2019-05-03 to 2019-05-05
Log from Poor Man's Mini 3D Printer
I managed to increase my machine's bed size from 35x35x35mm to 40x40x40mm. It may seem small but the 10mm increase in dimension is huge for me. Every millimeter helps! It all started when I learned that there are stepper motor sliders similar to the...

First Log Entry
Log from Very Expensive Tool with C++ and Javascript
The day is Friday, July, no August. The day is Friday August 1st, 2015, and finally I am convinced of the utility of a distributed portal logging system. It's a beautiful sunny day out in the land I am from. The blue pacific ocean only matched in majesty...

New Rotor Pulleys Working, New Engine Issues
Log from Goliath - A Gas Powered Quadcopter
ProgressAll of the new rotor pulleys have been installed and have been tested for a cumulative run time of 20 mins. (The video has yet to be edited together).) The great news is that there have been no occurrences of rotor bolts breaking and the new...

Rev 1. PCB Assembly!
Log from CRAPi2040
Alright here we go! In case you missed the last log, here it is! Check it out because what you're about to see will make a lot more sense. Just like the last log, this log is going to be a retrospective, but I promise that the next CRAPi2040 log to grace...

Time to mix two designs, A and B
Log from Low Resolution Programmable Matter
I finally 3D-printed it and put the motors and sensors, aka buttons and the scroll for mice, where they should be. I made two sides so I verify the design. Test the grabbing and movement, I did not print the female handle because I wanted to test the...

Gear trains
Log from Peace Clock
I've spent the last few weeks designing a new gear train for the rollers. Prototype 1 used a small motor with built in gearbox :37-1216RVFM Right Angled Motor and Gearbox 1:220£1.64This was mounted through the rear base part with the motor protruding...

Re-imagined Smart Tracker!
Log from Smart Antenna Tracker
I have had plenty of time to think about my antenna tracker and no time to work on it. This has allowed me to re-invent the smart antenna tracker for the better. I plan to use a brushless design much like the go-pro gimbals used for FPV. I will create...

Bigger Balls?
Log from DoorBall
I stopped by the Dollar Store again, and got a 3-pack of plastic, hollow "Baseballs" - the kind a small child would play with using a plastic bat. I found an obvious spot along the seam where the ball had been assembled from 2 halves, and make a hole...

1
2
3
4
5
>
>|