2883 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

Hardware - materials
Log from A functional Stargate
It's been a slow beginning, but I'm finally finding some time to start making the physical gate. Here are some basic specs:Outer diameter is 19cmMaterial is HDPE and polypropyleneIt is built in four layers: back, spacer/rotating ring, front, chevronsIt...

Hardware - chevrons, glyphs and other details
Log from A functional Stargate
I was scratching my head, wondering exactly how I was going to make the fine details like chevrons, glyphs on the rotating ring and other patterns. Then I looked behind me and saw the pcb mill I have been working on. What an obvious solution. I had a...

CNCed Assemblies
Log from Star Trek: The Mirror Universe Pinball
10/21/2013: Between stenciling sessions the house got struck by lightning about a week ago... so I've been digging out of the random bad electronics and such. One of which is my Color LaserJet which I need to finish the apron. Anyway; tonight after...

Mechanical Assembly
Log from 3D Printer
Step one: put together the bare bones of the printer. The plastic parts were all printed from https://github.com/jcrocholl/rostock. I modified the BOM heavily and will post when it is closer to completion and not a total mess. The only missing info was...

Improved Leg Design (now with 83% more Levers!)
Log from Stubby the (Teaching) Hexapod
An alternative to reducing the weight (which, given that the servos + batteries currently comprise more than half of the overall weight, and cannot be reduced) is to design the frame + legs in such a way that the servos are not supporting the weight...

Testing
Log from Ma'Tok Staff
The only pressure rated schedule 80 PVC I could find here was one inch diameter, but it did come threaded at one end. This saved me a bundle because I didn't have to buy a separate size PVC pipe, reducer, threaded adapter, larger cap, primer or glue...

Concept
Log from Theta Printer
Platter and Middle Section (θ1 Axis)The round table where object will be printed on. It is driven by a stepper motor and a large round gear, so it can move both directions clockwise or counter clockwise. This round table is approximately 320 mm...

Heated Bed
Log from Theta Printer
Aluminium PlatterThe cross sectional view below shows the original design for the platter. It consists of two layers of circular plywood. The lower piece has a hole in the middle where a nut is glued in place to connect it to the shaft. The upper piece...

Build log 1- arm construction
Log from Animatronic AVP Predator cannon
The arm is made from 1/8" thick Aluminum sheet and a bearing hub is fitted to each end of the arm. The arm end mounts are machined from 1" thick Aluminum plate and 1/4" diameter stainless steel rods are fitted as pivots for the arm bearings. The rods...

Build log 3- arm servo
Log from Animatronic AVP Predator cannon
To raise the arm I needed a very powerful servo so I used a geared servo drive to boost the servo's output torque. These servo drives use an external potentiometer attached to the output shaft drive gear for positional control. A thick Aluminum arm was...

motor holding plate
Log from Jimmy the mouse bot
I found a sheet of metal from an old CD ROM drive case. I cutted a stripe of the 1 mm thick metal sheet for the holding plate and bended two holders for the motors.It's not looking beautiful but it should work. I have to drill two holes in the bottom...

Finally new gear motors and wheels ordered
Log from Jimmy the mouse bot
I found some matching gear motors for my mouse bot. And wheels which fit on the axes. The wheels are 32 mm in diameter. And the motors rotate with only a liitle start voltage up to max 6 volts. So I can use my stepless motor driver program with them....

Ground Zero, Sort Of
Log from Low Cost, Extreme Performance Channel Strip w ADC
Many of the initial build details are still on paper, so this is a quick rundown of where the project is at:The front end is up first. Several different designs are nearing completion with most of the important components selected. The analog circuitry...

Requirements and specification
Log from Seek_r
Discussion of ‘hardware’ in this context refers to the electro mechanical components required to build Seek_r. It does not (directly) refer to the hardware requirements in terms of clock speeds, RAM space and other electronics. That comes later.The mechanical...

Design Notes - Rev. 2
Log from D-DAQ
Following 9 months of research I became more aware of what I wanted and what hardware was available that I initially believed I could reasonably use to pull it off with:---------- more ----------Redraw rate of 60 Hz for one screen, 30 Hz for two. This...

|<
<
1
2
3
4
5
>
>|