Close

14013 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸가격㉻ 《〈 문의 OIO↗5793↗7458 》〉 ㉺stealㅯ강남셔츠룸셔츠룸가격фtemperature 셔츠룸후기셔츠룸가격 강남셔츠룸ㅣ셔츠룸추천ψencouragementㅔ"

  • Random failure of claw machine
  • Log     from Toy Claw Machine
  • Since day one the claw machine has had random lockups that I thought a watchdog timer would fix.The three lockups that were seen were:Button for claw drop would not activate claw drop routine.  This was resolved by using the watchdog timer and to...

  • PCB's Done . . . but not tested. . .

  • Log     from Toy Claw Machine
  • The boards are finally finished.  This was a long time coming, but I could machine the pcb's (which I have been wanting to do pcb milling for quite some time, but things did not fall into place until now) the mill have to become operational.  The...

  • Wired Test
  • Log     from Toy Claw Machine
  • Now that the boards were complete, the boards could be wired into the box.  The boards were designed to keep the 5V power supply voltages separate between the two boards.  This required 2 separate 5V power supplies to feed the control voltages...

  • Powder Coating Controller
  • Log     from Toy Claw Machine
  • In trying to make the machine more presentable, the joystick cover plates will be powder coated black.  The Harbor Freight powder coat gun was used.  This was used on the Claw solenoid housing in the past.  It came out looking nice, so...

  • Program Modifications v1.04
  • Log     from Toy Claw Machine
  • To aide in testing of different setups/toys and claws themselves, the following features would be nice to have in the program:1.   Use pwm to start off closing of claw slowly and go to full current after a predetermined amount of time.  (Fade...

  • PIC Modifications Implemented
  • Log     from Toy Claw Machine
  • The following has been implemented:Allowed for communication with Claw machine mode via RS232 using the following menu structure:prog Enter into programming mode.  Game play will be suspended after push button routine is finished (normal claw machine...

  • App Creation
  • Log     from Toy Claw Machine
  • In the prior log I shortly stated that the app was going to be made from scratch. This would be a deeper look into the app programming structure that I don't have the time for. Fortunately, MIT's App Inventor 2 is available for use. With this program,...

  • Cartridge schematic
  • Log     from Fencing Scoring Box
  • I've always wanted to make my own Atari cartridge, and this project is a perfect excuse to give it a shot.  I have some old Atari development cartridges I bought on eBay, which unfortunately accept only old eproms that dont match the pinouts of...

  • Build tools update...
  • Log     from OpenXHC
  • Now you can build firmware with: IAR ARM 7.2 and upper, CooCox 2.x, Keil 5.x , GCC ( tested with 4.9.3 ARM toolchain )p.s: firmware totally tested only with IAR, other build not fully tested, but must works OK

  • Makeover!
  • Log     from VisualK-OS (Control Console) [Prototype]
  • After some compromising due to budget (I suppose this plagues a lot of us DIY folks, at times), the flood panels have been put on hold. However, this resulted in forcing me to re-think how I was approaching this project and relatively simplify the mechanics...

  • Pop Can Pickup
  • Log     from Anatomy of a Claw
  • The plan for the next edition of the claw tool is to allow for it to pick up a pop can.  Two frames of thought on this:1. Use a vacuum source to suck the pop can up into a cylinder.  The vacuum could possibly be a refrigerator pump.  Not...

  • moti v0.3 hardware revisions
  • Log     from Moti, a smart servo
  • We're currently working on v0.3 of Moti's hardware.Here's the major changes.  - Magnetic encoder replaces mechanical encoder. v0.2 used two continuous pots back to back to give 360º coverage. These pots were prone to misalignment, and...

  • update on update( )
  • Log     from Moti, a smart servo
  • I've been mulling over how to make Moti's programming interface flexible, like Arduino, while regularly running a number of required processes, including reading the position from the encoder, checking for network messages, and affecting the motor as...

  • Update - Summer 16
  • Log     from Moti, a smart servo
  • I haven't posted an update in a long time, and people suspect that the project is dead. Actually, it isn't. I got busy at my job for most of 2015. But things died down a bit this year, and so I've been pushing ahead on the project, revising both the...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday