90479 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗퍼블릭룸ち┒myイ퍼블릭룸퍼블릭술집Ζcoach 퍼블릭사이즈퍼블릭룸 퍼블릭술집㉰셔츠룸퍼블릭ЮblankП"

The clock in action
Log from Frequency counter becomes Nixie clock
I made a short video showing the clock working:

Reverse Engineering from Package Data
Log from Reverse Engineering a Drone
As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...

Deep Sleep
Log from ESP8266 Native
I've been testing the deep sleep mode on the ESP-03. I loaded the frankenstein firmware from here https://github.com/nekromant/esp8266-frankenstein onto the module to test the deep sleep mode.Note, you need to tie gpio15 to GND in order to boot any firmware...

Sun Tracker 2 Revision 1 - Prototyping Board
Log from SunTracker 2 Revision 3
With the compass functionality tested on a breadboard, the next step is to transfer it to a universal prototyping board, adding a status display and IO expansion ports to drive a LED ring that simulates the horizon. For the board, I am going to use the...

Delta coding and some stats
Log from PEAC Pisano with End-Around Carry algorithm
With the new harvest, I estimate that the perfect and maximal orbits under m=1M is around 100K. This starts to make quite a large .h file to include in the sieve generator. Not that it's such a concern but scalability, you know.... And embedding such...

Three Blobs in the Bush and Nothing in the Hand.
Log from Livestock and Pet Geofencing
I have racked my brain in search of a way to get the blobs to run on the Oak-D Lite. I tried to use the Depthai SDK and API. The code I used is available on our project's GitHub repository. The Intermediate Representations (IRs) and blobs are available...

Log 5 - 1 3d 3 servo leg experiment (incomplete)
Log from Quadruped learning project
So I want to make some notes because if I don't there will be less notes on the 3d 3 servo experiment, and I had a lot of trouble with the code so I want to get as much trouble into my notes. I struggled with the angle of the hiprotate servo in particular,...

We Have Blinkenlights!
Log from 2:5 Scale KENBAK-1 Personal Computer Reproduction
With the wiring complete I wrote a small program in Python to test the lights, buttons, and switches on the front panel. To be clear this is NOT the KENBAK-2/5 emulator running a program (yet). As it turns out I did have to replace one of the LEDs...

More Power Igor
Log from Cardware
Well, finally I was let down by a lack of amps, the batteries I have just arent strong enough to move the limbs without at least doubling them. And I'll need to upgrade the regulators. Such is life...I added a little bit of code to the Pi's monitor....

Up to date
Log from Gigatron Forth
[This post brings me up to date with the work I've done so far, and corresponds to the state in commit 0e4b928083ae69bb6ae577197ac016e93a77e80e] I've documented my design for the NEXT routines, which I've committed to Github here. It's a little sketchy,...

The resistive touchscreen
Log from Portable environmental monitor
July was a tough month, and August is no different. Due to some components arriving late, I've only been able to start my work on the Hackaday.io project with considerable delay. So I had to catch up with everything and squeeze the entire development...

ROM checksum code
Log from Re-UD-80 - a larger display for Epson PX-4 / PX-8
The 5.21E ROM works file with the current board, but the 7.11A ROM uses a different pin for the vertical sync signal. This can be fixed, but then the 5.21E ROM results in no display. Rather than fixing the hardware (with a jumper to be changed when the...

Success!
Log from Voyage 200 Upgrades
So, the results are different than expected, but that is just fine. I'm running my V200 at 2x the speed it came from TI. For those who are TL:DR with my logs, you need a 1.21 kOhm resistor and an 18 pF capacitor. I never ran the MD5 checksums as I didn't...

BQ25504 Working Like It Should
Log from Ultra-Low Power LiPo Charger via Energy Harvesting
15 July 2018 First a word about packaging. I designed the BQ25504 breakout board to be as small as possible because I had in mind the idea that it would become part of an integrated (hybrid) power source. That is, the LiPo battery, solar cell, and BQ25504...

Fibonnaci checks out
Log from GTXL Gigatron clone computer with keyboard
Well, I should have expected the Fibonacci code to work since I already checked out all the previous functions of it. So I'm wondering what isn't going to be working to prevent the ROM code from working. I'm running the ROM v3 code because...

|<
<
1
2
3
4
5
>
>|