Close

2714 Results for "Y 대전 프로토 베팅 CDDC7.COM ▧프로모션번호 B77▧농구경기분석ϧ에스퍼홀덤℁KB손보👢메이저리그라이브중계ӈ대전 프로토 베팅애용 assurable/"

  • Y-axis motor mounts
  • Log     from OpenPnP - Linear Rails
  • These were machined in a similar way to the Y-axis sleds. Starting with a 1/4" aluminium plate, it was faced down to 5mm and then the screw holes were milled out.Then it was profiled, leaving support tabs (and correct speeds/feeds this time!). It was...

  • Day 3: Y Axis
  • Log     from YAPR
  • To conceal the rough ends of the rails, I covered them with printed end caps, which also act as belt tensioners. The belt brackets are fastened to the end caps and tightened using M3 screws. Afterwards, I fixed them to the rails with more M3 screws...

  • Y-axis sleds
  • Log     from OpenPnP - Linear Rails
  • The Y-axis sleds are what that attaches the Y-axis carriages to the X-axis.I started out with some aluminium plate that had been faced down to 8mm thick.Then I did a 2D profile of the part, leaving tabs to keep the parts secured in the stock.Oops, or...

  • X Y calculations
  • Log     from Simple & Cheaper CNC Shaper
  • It looks like the XY calculations are quite easy. Its called forward kinematics and can be seen calculated here https://www.marginallyclever.com/2012/02/drawbot-overview/. Next I have to do interrupts on the encoder rotation to make sure I get every...

  • Designing the Y-Axis
  • Log     from Turning a Makibox into a PCB Mill
  • I’ve been iterating the Y-axis in Fusion 360. A common design I have seen on other moving-bed designs is four linear bearings - one bearing at each corner of the bed. The problem with this design is you lose the distance between the bearings in travel....

  • Building the Y-axis
  • Log     from Turning a Makibox into a PCB Mill
  • I've now built the aluminium frame and completed the Y-axis. Of course, this was not without it's problems.Firstly, I misordered - I was one set of uprights short. This may not be a massive problem though, as I hadn't taken into account the...

  • DRO Y axis complete
  • Log     from Reviving a Shoptask 1720 XMTC Gold 3-in-1
  • Rough mounting showed the scale should be spaced out 3mm from the table to match the head below, so I made end brackets that act as spacers, end caps and cover supports. Parts are mounted with 5mm screws that came with the scales. The cover is attached...

  • Implementation: Y axis
  • Log     from Reprap Neumann
  • Ok, so I'm basically going for an Prusa i3 like machine that is close to 100% printed. I would like to avoid using linear rods or bearings, as good rods and bearings aren't cheap. In a worst case scenario, if my printed rails fail I could always fall...

  • Y axis bearing blocks completed
  • Log     from Simple DIY laser cutter
  • I have just finished the Y axis bearing blocks.  These support the metal rod from the stepper motor that hold the gear that moves the gantry.  I made these with 10mm HDPE on my CNC.  HDPE is fantastic to work with!

  • Aluminium parts for Y-Axis
  • Log     from Axis
  • I've finally received the aluminum parts for the Y-axis assembly. They had been cut by water-jet. The holes and threads need to be machined.

  • Y Axis plate prototype done
  • Log     from Festo CNC (conversion)
  • Got the Y Axis Stepper motor mounting plate printed in PETG and tested it. Now for testing the actual movement of the axis. Test setup is gonna be an Arduino, Stepper Motor driver, Power Supplies and a laptop.

  • Y Du Dis?
  • Log     from MoonLITE
  • Existing Solutions There are a number of existing solutions for adding night time lighting to living environments.  There are of course light switches and lamps on your bedside table. There are the ever present night lights.  There is the infamous...

  • Building the CP/M Memory Image
  • Log     from My CP/M Single Board Computer
  • Building the CP/M Memory Image Will I have built and tested boot.asm, echo.asm and cbios.asm with echo.asm. So now to put them together! Well I started that, putting cpp.asm and bdos.asm (from https://github.com/brouhaha/cpm22), and my cbios.asm into...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday