Close

90479 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • Potential Extruders
  • Log     from Open SLM
  • Using the partial vacuum in the chamber and atmospheric there is plenty of pressure differential to spray powder, Looking into piezo electric valve similar to inkjet printers (difficult to manufacture) for high precision a magnetic valve for thicker...

  • Cyclone V FPGA
  • Log     from Lion FPGA CPU/Computer
  • Moved the project to Cyclone V FPGA 5CEFA2F23I7, now I don't use an external static ram chip because this FPGA has enough internal ram for Lion's 128K ram + 32K Video ram + 12K sprite ram. It also has plenty IO pins for new features and it's logic elements...

  • Printing gears
  • Log     from Crazy Clock
  • After a couple of iterations, I believe I have a pair of gears designed that work.Printing these is fairly difficult. As I noted originally, there's no way an FDM printer would be able to get these right. With SLA, the issue becomes how you...

  • life-size
  • Log     from 2.5-3D thing
  • ah.So this is roughly life-size...The teeth, then, are like... *maybe* 1mm at their widest. and, unless I do everything *just* right (yeah, right... especially not from a [low-resolution] photograph) it seems most-likely I'll only really have one tooth...

  • Ivan with Bearings!

  • Log     from Ivan the Teambuilt Robot
  • The photo above shows Ivan printed with a 0.75 mm nozzle for strength and speed, plus his new design has 608ZZ standard skateboard bearings on the planetary gears and filaflex teeth on the same planetary gears. The flexi teeth are better than plain old...

  • Updated Drive System
  • Log     from GoKart Tank
  • After much introspection, it looks like I am going to make some changes:3D Printed drive and idler sprockets at 17 teeth instead of 113D Printed road wheels (yes, printed), but also at 17 teeth, that will raise the chassis of the tank higher off the...

  • Flexspline Racheting
  • Log     from Open HD
  • I thought this would be worth publishing a log about. While preforming a load test I found that the flexspline will start to rachet if too much reverse torque is applied. I find this interesting, I was under the impression that the first mode of failure...

  • 4/17/23
  • Log     from Mood Gradient
  • After designing our main control box through the website "boxes.py," we assembled it through the laser-cutter computer, positioning each cut-out to make the most efficient cuts. We made sure to allow a bit of room between each piece, just in case the...

  • Figure Wheels
  • Log     from 3D Print Babbage's Difference Engine No.2
  • Figure Wheels and Sector wheelsThe figure wheels are made from 40-teeth gear. Each figure wheel can store one digit (0 to 9). The nerigboring figure wheels are connected by a sector wheel, which is a section of a 40-teeth gear.The combination of...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday