Close

3766 Results for "%EA%B0%95%EB%82%A8%EC%95%84%ED%85%8C%EB%82%98%E3%80%8A%EC%B5%9C%EC%A0%80%EA%B0%80 OIOX5793X7458%E3%80%8B%EA%B0%95%EB%82%A8%EC%97%AD%EC%85%94%EC%B8%A0%EB%A3%B8%E3%88%97 %E3%80%8A%EC%B5%9C%EC%A0%80%EA%B0%80 OIOX5793X7458%E3%80%8B %EA%B0%95%EB%82%A8%EC%95%84%ED%85%8C%EB%82%98height%EA%B0%95%EB%82%A8%EC%97%AD%EC%95%84%ED%85%8C%EB%82%98%EA%B0%95%EB%82%A8%EC%97%AD%EC%95%84%ED%85%8C%EB%82%98%EA%B0%95%EB%82%A8%EC%97%AD%EC%95%84%ED%85%8C%EB%82%98fall %EC%85%94%EC%B8%A0%EB%A3%B8%EC%95%84%ED%85%8C%EB%82%98%EF%BC%B7%E2%92%B3%EC%85%94%EC%B8%A0%EB%A3%B8%EC%95%84%ED%85%8C%EB%82%98exciting"

  • We get signal

  • Indeed, immediately after running the Windows software in a VM with the device connected I was getting a live data log of the CO₂ concentration! This screenshot shows me breathing into the vicinity of the sensor:Ok, time to disconnect the device from...
  • Update After A Long Pause

  • Update I rebuilt the paged memory board and the Flash Programmer for a ZIF socket. It allows quick and easy Firmware updates. Other than a initial glitches for the Flash Programmer (probably still wet from the solder flux solvent), it all works. Now...
  • EC Sensor

  • EC is the abbreviation for Electro Conductivity. It is used to determine the nutrient concentration of the solution. This factor is essential to optimize the soilless culture. Indeed, the nutrient concentration will not be the same for a seeding as for...
  • EC Sensor

  • EC is the abbreviation for Electro Conductivity. It is used to determine the nutrient concentration of the solution. This factor is essential to optimize the soilless culture. Indeed, the nutrient concentration will not be the same for a seeding as for...
  • Updated firmware and getting results

  • I was able to follow ElectroDragon's firmware update guide to update my ESP8266 modules from 00150900 to 0018000902. Once this was done I was able to run a simple AT+CWLAP and listed all AP's around me with security information, SSID name, RSSi, MAC,...
  • 20230214a -- Memory, cont.

  • Operating under the current assumption that RAM is 32 KiB banked at address 0000-7fff, with the first 256 bytes masked off by special function registers and internal SRAM, some other code sections of interest were found.  E.g.:ED00 loc_ED00: ED00...
  • Peak Performance

  • Below is a picture of a patch that gates the input to the ADC so that it is only looking at the value from the EC probe at the end of the square wave pulse, after the initial transient has settled out. It works really well, dutifully recording the voltage...
  • Expansion connector

  • Pinout nc140A15/CRUOUTnc239A14CLKOUT338A13D7437A12D6536A11D5635A10D4734A9D3833A8D2932A7VCC1031VSSD11130A6D01229A5CRUIN1328A4!INT4/EC1427A3!INT11526A2IAQ/HOLDA1625A1!DBIN1724A0!HOLD1823READY!WE/!CRUCLK1922!RESET!MEMEN2021!NMI Pinout matches the TMS9995...
  • Topology (1)

  • In this post I want to share how I selected a suitable topology for the resistor network that will be the core of the programmable decade resistor. Although I did some online “research”, the following criteria determined my choices: Switch...
  • Points about using an ARM uC

  • Switching over to an ARM based solution is much better than an AVR+RTC chipset solution. Been looking at the STM32F030 chip and it is a perfect fit for this application! It has the following very desirable characteristics:32.768kHz oscillator on-chip....