I have a little bit of code left to debug. I also need to glue the rings to the mirror and the LED strips to the rings. I also need to make the top mirror. The project picture shows what it will look like minus the top mirror. ...
Polyformer scored international top 20 at James Dyson Award, we are super proud of the achievement!You can see the James Dyson Award entry here: https://www.jamesdysonaward.org/en-US/2022/project/polyformer-plastic-bottles-to-filament-in-rwanda/....
Here is the top level schematic diagram, showing the interconnection of all of the individual boards in the project. Interconnection is all done with #24 and #22 wire and Molex CGRID ||| connectors. A few years ago, I bought a proper crimper for these...
The 10th unit in the US is now online from Prescott, Arizona. The average measured radiation level is currently at 0.11uSv/h:Very similar to initial measurements in Timisoara:
Unit 12000011 just joined the network from Brisbane, Australia, as the third unit on this continent. The measurements show relatively low radiation levels:And here is a comparison to initial tests done in Timisoara:
A new function has been added to the concept of “Top Navette” which Allows exchanging (with other "Top Navette" users) informations about route conditions, this functions is named “FC9”.The characterization of this function...
First panels are completed and can go online. Here are the first two assembled PCBs, one for development and one for actual usage in the kitchen.As you can see, there is a lot of empty space in the box, but I will design the whole thing again for the...
The 7th uRADMonitor detector in the US went online recently and is transmitting from Orlando, Florida. This is one of the newer A2 revision units, that were available in limited quantity a few weeks ago.Besides radiation and temperature, this unit also...
The first stockie tag(attached to serial port for debug) can now connect to the database and check the status of my coffee. This means that basic functionality in the tag software, gateway software and server side software is done, time to start building...
I wasn't happy with my initial top cover designs but I want one since day one. It's quite cumbersome to clean or remove the dust every once in a while from all the motion parts and connectors on top so I want mainly top cover to solve that. Of course...
Frame size (outside) : x:410mm, y:410mm, z:440mm. All aluminum extrusion 2020 and 2040 went from old Ender 5 3D Printer frame and have their original length. I have added eight M3.5holes (four on two top and four on two bottom profiles) as...
Sizes and Dimensions for itemsI am using this log to put some item dimensions for me and my case-assisting heroes; reference :-)Also will put a note on where in the case I am feeling about putting it.10 Port USB Hub:189 x 38 x 23mmMount on the bottom...
I've drawn out a basic concept for the enclosure in OnShapeThe enclosure consists of 4 main parts. The base slides onto the metal bracket, and has a opening in the bottom for the humidity, gas and particulate sensors to sample the air without directly...
I've finished designing the HV and display boards. Both are 18mm in diameter and stack one on top of the other, and both are double-sided. When they are connected together, there will be a gap of 5mm between the boards.I've incorporated reverse-polarity...