Wrote a very basic command interface with three commands:W - Write the EEPROMR - Read the EEPROMB - Bounce an LED across the RPP-UIO-16 cardThe result looks like this:Write to the EEPROM Read from the EEPROM 0000 00 01 02 03 04 05 06 07 08 09 0a 0b 0c...
Tonight I gathered some reference/research material for this project. Fortunately, several others have done some really great work with this module, so here's credit to them: LTC3780 DatasheetBeyond Logic blog postTemplaro blog postGreat Scott videoJulien...
I haven't done any further tests with the UDP controls, but I captured some more traffic in order to try to figure out how is the video transmitted between the quadcopter and the mobile phone. The communication seems to be established through port 8888...
I'm going to create a stand-alone PSoC project to use the PSoC to read SD cards. I'm going to start with the hardware defines for this project (which should leave the Z80 hardware pins unmolested) and just not download code. For the software piece, I...
When entering a short test sequence on my remote this is what my receiver displays (a dot means an exact repetition of the previous packet):All on: 07 B0 F2 EA 35 90 01 B9 AC F9 .......................... 07 B0 F2 EA 35 90 00 B9 74 E0 .. Color red: 07...
Hardware testing is complete on all the jump and branch instructions. So that's the first 8 out of 256 instructions tested! The next 24 are loading operands. These should work fine since the jump/branch instructions are also loading operands in order...
My friend Dylan Brophy inspired me to investigate the ability to output the cyrillic text using different output devices, supported by Terminal-BASIC. 1. Using symbols others then capital latin in identifiers not possible and unnecessary. 2. USART output....
Initially I thought the data stream from the camera board to the quadcopter controller was PPM. This signal is only active when the app is running and the on-screen controls are brought up. The quadcopter has to be power-cycled in order to be controlled...
An article recently published on MOONGIFT, a Japanese developer site, has showcased RasDash! The article is entirely in Japanese and Google Translate won't accept the URL as it has special characters but YANDEX does. Below are some links and a basic...
For quite some time I have been thinking about the possibility to using a laptop to run all the heavy OpenPlotter and OpenCPN stuff instead of using a Raspberry Pi. The performance of the RPi is... well it's usable but it's not a pleasant user experience....
Before I start this log on the keyboard I should mention that I'm in the process of putting all of my writings and software on the Video Writer on a small website. The following is an almost direct copy of what will be the article about the keyboard......
Here are some "Quickstart" instructions for the Menu, BASIC, VTL2, and Visual/02 programs in Mike Riley's alternate program ROM. They're not a full manual yet, but will get you started and give you a "taste" of vintage programs and languages. A Quickstart...
I've got the BIOS loading for Multi-boot Multicomp. It boots up to the Multi-boot prompt. > Available Commands: :ccxxxxiibbbbbb Load Intel-Hex file record Rxxxx Run from address xxxx Sddd System boot Iddd Init: Format directory Pddd[,xxxx] PutSys: write...
Detecting and identifying a card As stated in an earlier log, the card insertion is detected by grounding the pin *CD. But this is not enough to make the scope believe he have a know card inside him. You need to indicate him what type of card was inserted....