15 Results for "raspberry pi"

Openthing 1 - ESP-CM3
Project by Mirko
ESP32-S2 based Module as drop-in replacement for Raspberry Pi's Compute Modules CM3
- 8
- 6

PlainDAQ - DAQ Module for Raspberry Pi Pico
Project by Alperen
Open Source DAQ module for Raspberry Pi Pico
- 13
- 12

BerryNet - Deep Learning Gateway on Raspberry Pi
Project by eurekamfc
An AI kit for hobbyists -- release the power of AI on edge devices https://github.com/DT42/BerryNet
- 16
- 11

Aurorapi
Project by Shreyasvi Natraj
It is a small raspberry pi based scanner that can be used in order to carry out text detection and to make digitized copies of documents
- 5
- 5

DIY Golf Launch Monitor
Project by James Pilgrim
Launch monitor using low-cost raspberry pi and camera hardware to return ball launch speed, angles and spin (very much still a prototype!)
- 5
- 3

SCRYLENE - Open source Ethylene analyzer
Project by Aman Garg
Building an open source analyzer to quantify ethylene gas and mechanism to map rotting behavior for fruits/vegetables etc.
- 1.1k
- 9

LOTP Two-Wheeled Self-Balancing Robot
Project by Limenitis Reducta
It is an Open Source –DIY- project. It can maintain its own balance and can be controlled remotely via Bluetooth connection.
- 50
- 42

DIY DOLY
Project by levent erenler
Tiny robot packed with a vast amount of technology.
- 191
- 17

Meditech
Project by Enrico Miglino
A multifunctional measuring system for health and disease support, in cases where it is difficult an immediate intervention.
- 1.4k
- 13

Parabolic solar hot water heater
Project by fred frazelle
Goal: To finish building an Open Source parabolic hot water heater.
- 4
- 0

Cheap and Easy to Build 3D Printer
Project by Sugapes
A budget 3D printer that is easy to build with basic tools. A closed loop system using optical mice is to be used for greater accuracy.
- 667
- 225

Open Sourcing Surgery
Project by leandro
The project idea is to design custom surgical instruments like retractors both in size or shape and 3d print them
- 772
- 13

Motion Capture system that you can build yourself
Project by Bruno Laurencich
An open hardware-software framework based on inertial sensors that anyone can use to build a human motion capture system.
- 454
- 323

ramanPi - Raman Spectrometer
Project by fl@C@
The open source 3D Printable Raman Spectrometer using a RaspberryPi and easy to find off the shelf components..
- 2.6k
- 703

M4-Breadstick (Retired) → Raspberry Breadstick
Project by Michael Rangen
A long and thin development board, with spaced out I/O pins to minimize the length and number of jumper wires required.
- 19
- 25