40 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

Yet another guide on how to make PCBs at home
Project by dechemist
Here I describe my method for making 1 and 2 layer PCBs at home via lithography and etching
- 5
- 4

Brushed motor speed control with stable RPM
Project by Vitaly
Uses brush current pulses to measure speed
- 3
- 2

Lathe Enclosure
Project by David Plass
I was tired of getting lathe chips all over me. I made a quick enclosure from a clear storage bin.
- 0
- 1

3D Printed Vortex Particle Separator for Shop Vac
Project by Aaron P.
A small(er) Vortex Particle separator that can be easily 3D printed. Use with a 2" or 1.25" (adapters needed - can be printed) vacuum hose.
- 339
- 0

RPSD: Recycled Plastic Skateboard Deck
Project by Jason Knight
Tackling plastic waste, democratizing access to skateboarding and proving to people what products made from waste can really do.
- 23
- 21

Recycling Textile Nylon from t-shirt to 3D prints
Project by Matteo Fabrizio
Nylon fabric gets grinded, dried, extruded in form of pellets and finally used to produce objects with 3D printing
- 94
- 2

Dual Channel POV display
Project by Daniel Ross
Two channel SERIAL POV led display.
- 6
- 7

Minamil 3dp: another minimal CNC mill
Project by Paul McClay
A very compact, very inexpensive, very DIYable, very precise little CNC mill. This one uses 3d printed parts.
- 49
- 35

CNC desktop laser/dremel mill/microscope
Project by Kert
The aim of this project is to make a desktop cnc machine with at least A3 working area (420x297 mm), Z < 100mm with sub 300 EUR budget.
- 187
- 47

TwinTeeth: The PCB mini-factory
Project by Diyouware
Diyouware TwinTeeth is a open-source PCB mini-factory targeted to the electronic hobbyists.
- 705
- 53

ProtoCycler
Project by Dennon Oosterman
A plastic recycling system for 3D printers...junk goes in, filament comes out! Fully integrated, automated, novel tech & closed loop control
- 1.1k
- 25

Thiiiiiiiing
Project by DeepSOIC
What if you could slip a dremel into your pocket?
- 568
- 15

Garden Shed CNC
Project by penleeki
Making a CNC machine as cheaply as I can with things I have in my shed
- 21
- 15

Air-cooled flip-clock
Project by Johannes
One out of two cheap clocks from eBay melted in the sun. I equipped the second unit with fans to save it from the horrors of Swedish summer.
- 355
- 5

PCB /SMT MAKER LAB @ Home
Project by mosaicmerc
This project outlines how to do advanced PCB making at home with proper tooling. Tooling includes a laminator and hobby laser.
- 362
- 45

1
2
3
>
>|