141 Results for "《〈 문의 OIO↗5793↗7458 》〉 선릉셔츠룸㉢㈊blankΓ셔츠룸추천셔츠룸℡few 선릉셔츠룸셔츠룸 선릉셔츠룸œ셔츠룸추천Яsupper┤"

Assemble your Printer
Instructions from The Trash Printer - Version 3
You can check out the interactive model for the Trash Printer on the SketchUp 3D viewer, or download it from the SketchUp 3D warehouse. You can use this model as a reference to see how all the parts go together, and you can also use it to modify...

HP5334A Frequency Counter Control Software
Details from HP5334A Frequency Counter Control Software
The HP5334 frequency counter is a fairly old instrument, dating back to the late 1980's. The GPIB interface language predates the SCPI language that is in common use now. The old GPIB language is referred to as R2D2 language and is not particularly human...

Schematic and Operation
Log from HydraMETER
The schematics are done! I kind of want to do a video going over the design process as this has evolved over what's now several years, there have been a ton of changes to everything. For now I'll throw some (slightly) better explanations...

Pump Control Switch
Details from Pump Control Switch
Living Off-Grid in Wales UK - (inverter overloading confirmed)LAST UPDATE: 3-21-16 ATF1500A logic infusion. Resistor arrays? Open area is for DC supply components. Compare to the picture at the bottom.Achieved WINCUPL compilations of three PAL devices....

Multi-Function Automatic Move Smart Car for Arduin
Details from Multi-Function Automatic Move Smart Car for Arduin
The multi-Function automatic move smart car uses an MCU development application system and a 4-wheel driver system,the core of which is arduino Atmega-328P.It can realize multifunction,such as tracking,obstacle avoidance,remote control and some other...

Working Out the Audio Path
Log from An Old Fashion Acoustic Modem for the iPhone
Working Out the Audio PathMicrophone Estimate CheckHere is my estimate for speaking into a microphone 25 mm away:Speaking into a microphone EstimateVoice at 1 m60.0dB SPL (1 W / 1 m)No Power Adjustment0.0dBSPL (uP) -> V rms (the magic number!)-74.0dBMicrophone...

ARX Hand Project X1M
Details from ARX Hand Project X1M
ARX X1M Design Overview X1M focuses on developing an advanced mechanical design that maintains a high functionality whilst being modular and maintaining ease of assembly. The hand mainly functions off of a configurable whippletree block that drives two...

RC 2022/10 Day 6: Flounder Interrupted
Log from Flounder Z180 Computer
ASCI Clock Generation I've been cheating a little in the way I use the Z180's onboard serial ports, specifically the baud rate generation. In a typical application, the baud rate is generated in the CPU as some factor of the system clock PHI. It's a...

Motorized Camera Mini Jib
Details from Motorized Camera Mini Jib
Features: • Typically up to 550mm of Jib Travel more with lighter payloads. • Vertical, horizontal & diagonal motion. • Camera head can be mounted Upright or under slung. • Digital Bird Pan Head can be used to provide a second axis for pan control of...

LED PCBA UV Torch
Hacker page by luozhan2022
What is Needed to Start a PCBA UV Torch Project Here is a list of suggested key components needed for this small project: 395nm 5mm UV (ultraviolet) LED x 12 4V/500mAh SLA (sealed lead acid) battery x 1 N/O (normally open) type momentary push button...

65c02 Homebrew Computer on breadboard
Details from 65c02 Homebrew Computer on breadboard
Update Q1 2022 I will try to keep this section of the hackaday site going with short updates for any interested folks. The most recent update is about the real-time clock.Realtime clockI wasn't that bothered about adding a realtime clock...

CSTroN – Monitor powered by an ancient CSTN screen
Log from CSTroN - CSTN LCD monitor
Introduction Back in the last century, when the CRT was still the most common technology for computer monitors. It was quite common to see such an argument: the LCD will probably evolve and produce better images, but it is never going to replace the...

IOT Based Pulse Oximeter Using Esp32
Details from IOT Based Pulse Oximeter Using Esp32
Story In this project, I will show you how to make IoT based Pulse Oximeter using ESP32, MAX30100, and Blynk Application.we can monitor those values from anywhere in the world using the Blynk IoT cloud platform. As there is an availability of online...

Multimeter +
Details from Multimeter +
The following is the Multimeter+’s circuit block diagram:Main page of the project, shows all connections between the different parts of the schematics diagram:The instrument has two low frequency high voltage independent inputs for measuring signals...

Electronics details
Log from Solid state flow sensing using EIS
foIn this log, let's examine the electronics of the Rapid Impedance Spectroscopy Array, RISA.---------- more ----------ConstructionFigure 1: Unpopulated PCBs showing board stackup.RISA consists of 2 two-layer boards, which are connected by .1" headers....

|<
<
6
7
8
9
10
>
>|