22 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Cobalt 3, a pocket computer DIY
Project by Leonardo Leoni
A fancy pocket computer you can build yourself with simple through-hole components
- 52
- 48

Handheld Blackjack
Project by Jim Heaney
Learn to solder while building a fun handheld game!
- 0
- 0

DIY ESP32 SmartClock Kit with Weather Forecasting
Project by Makerfabs
An interesting kit for soldering and assembly
- 2
- 2

Badly damaged Gameboy Advance game lives again!
Project by Solderking
A previous repair attempt on this Gameboy game left it worse than before. Many traces and pads were destroyed, but not for long!
- 1
- 2

WS2812B (Neopixel) Earring
Project by makeTVee
Earring with 16 addressable LEDs (WS2812B-2020) and rechargeable coin cell battery.
- 40
- 42

Electronic solder paste dispenser
Project by Jung Hoon Lee
Electronic paste dispenser with pick and place pen
- 7
- 4

DIY distance lamps
Project by Maximiliano Palay
This project combines 3D printing, some electronics integration and clever programming to enable two remote lamps to be in sync.
- 2
- 3

Easy breadbording of 0603 SMD led / resistor
Project by ftregan
Beginner friendly way to solder 0603 or larger components to pinheaders so you can plug them in your breadboard. 2 minutes and you are done.
- 250
- 16

Open Rework Controller (ORC)
Project by netbeard
PCB and PC Host software for controlling an infrared rework station
- 53
- 12

Stickvise - low profile soldering vise
Project by Alex Rich
Stickvise is a low profile vise designed for PCB soldering. This product was born on Hackaday.io.
- 269
- 231

Sak mod for hackers
Project by gilmarbr
Mod for Swiss Army Knife scales to accommodate a soldering iron and instruments like a small scope, VOM, clamp meter, data logger and ...
- 49
- 10

Threaded Insert Press
Project by Alex Rich
This hack combines a soldering iron and arbor press to create a cheap thermal press for installing threaded inserts into plastic.
- 34
- 17

$100 Raspberry Pi 2 laptop using a lapdock
Project by Dylan Bleier
The Pi-Top will run you $300. This project creates an equivalent product for 1/3 the cost by being resourceful with cheap hardware.
- 457
- 16

ProtoPnP
Project by Alex
The goal: to make a Pick and Place machine that is small on cost but big on ability
- 46
- 27

Surface mount hot plate reflow controller
Project by Endbots
Custom built reflow controller for soldering surface mount devices
- 8
- 3

1
2
>
>|