137 Results for "강남권룸싸롱【θ1θ↔4⑥48↔0⑨30】xavi서울룸싸롱±선릉추천업소￡역삼풀싸롱ksubi강남룸접대paul서초풀싸롱σ강남추천업소θ선릉풀싸롱δ"

Raptor12 Wireless AC Dimmer
Project by KingOfKYA(Travis K. )
Christmas, Halloween light string controller that is wireless, 12channel dimmable AC controller, with an AVR for $30
- 144
- 53

Satellite Antenna Rotator Mechanical System
Project by Bharbour
This is the Satellite Antenna Rotator mechanical system for my step motor driver board project.
- 11.2k
- 18

Lazydoro
Project by Vasilis Georgitzikis
A wristband that helps me overcome my laziness, and has me get up and move a bit every 20 minutes
- 32
- 12

Benchtop Power Supply
Project by Erbey
- 5
- 1

Camera Lens Support Bar
Project by Mike [Cazzwell] Cassell
A camera lens support bar made from slotted extrusion that fits onto a tripod
- 0
- 1

MicroRF Remote
Project by Saul
4 axis Remote for Arduino. 4/5 ch/servo RX.
- 4
- 3

K-9
Project by Andrew Bills
Raspberry Pi powered K-9 GUV with a NES controller style remote
- 361
- 7

MIDI-Controlled Slide Whistle
Project by TheMixedSignal
Uses an Arduino Due and a stepper motor + driver to control a slide whistle made of 3d printed parts and PVC pipe. Laser-cut base plate.
- 2
- 3

IoT GitHub Frame
Project by Paweł Skórka
This project will help you track the popularity of the selected github repository live
- 459
- 5

LED Light Clock
Project by Jon Kunkee
Two 1-meter strings of APA104 LEDs, one ESP32
- 3
- 3

Mini Tabletop Tesla Coil Powered by an Arc Lighter
Project by Tom Meehan
Rechargeable Portable Spark Gap Tesla Coil for Science Demonstrations
- 5
- 5

4) Electronic
Log from VinyGo, a stereo vinyl recorder
All schemas and PCB (gerber), can be downloaded on the VinyGo git project. https://github.com/Mras2an/VinyGo/tree/master/02_Hardware4.1) Structural diagram 4.1.1) FS1.1: Power supply Create power for all features on VinyGo Board. Input voltage 12V 5A,...

Building block : divide by two
Log from Bipolar Discrete UART
See at the bottom for a slightly better version This circuit shows a variation on the one presented in the first log : This shows the "SCR slices" linked by two NPN "pass gates". The output is looped back to the input with an additional NPN. So it is...

Pulser-sequencer
Log from Clockwork germanium
Remember the last logs : the goal is to use as few transistors as possible to send a string of consecutive non-overlapping pulses to several pass-gates. Here the design uses NPN as primary type but it will be reversed later because PNP are the majority...

D-FF without metastability
Log from Clockwork germanium
Exploring the First principles of Flip-Flops was very interesting but going back to the basic/classic "Eccles & Jordan" configuration (with 2× PNP or NPN) proved the weakness of the approach. The previous log I don't know why it works shows that...

1
2
3
4
5
>
>|