17 Results for "㉣ 피망바둑 ㈍ rka119.top ㅰ 그레잇게임 ㈖ 사설홀덤 ㆌ 포카치는법주소 ㉫ 노리팡바둑이 ㈔ 배터리사이트게임주소 ㈓ 텍사스홀덤추천 ㈚ 맞고게임추천"

Open Sky Anchor WiFi Drone Brings The GIG
Project by Josh Starnes
Mission "Wifi" Impossible > Bring Long Range 5G and 2.4 G WiFi Backed By A 1 Gigabit Fiber To The East Brainerd EF-3 Tornado Disaster area.
- 2.7k
- 120

StickHub - The Space Friendly 7-Port USB 2 Hub
Project by rbtsco
Shaped like a USB stick, ideal for a Raspberry Pi or Jetson. Connect up to 28 devices to a Pi.
- 27
- 28

MiniHawk VTOL
Project by Steve Carlson
A fully 3D-Printable VTOL aircraft, designed as a hybrid fixed-wing plank + tricopter planform. For FPV and UAV experimentation.
- 222
- 170

3D Printed Flying wing FPV Drone
Project by K+
In this project, the objective was to build a FPV flying wing with over 700mm wingspan that could be printed under 24 hours.
- 825
- 18

LOTP Robot Dog V2
Project by Limenitis Reducta
Modular Autonomous Quadruped Robot Project (Open Source)
- 194
- 150

Swarm
Project by cb22
A flying, distributed wireless mesh network. What could possibly go wrong?
- 868
- 89

Warpquad 230mm Drone Build
Project by Richard Hogben
The very fast warpquad quadcopter drone.
- 27
- 13

Firefly — A Low-Cost Flying Robot to Save Lives
Project by Mihir Garimella
Firefly is a low-cost, modular flying robot for first responders that uses intelligent, nature-inspired algorithms to navigate autonomously.
- 2.4k
- 68

Raptor V-Tail Quadcopter Drone
Project by ken.do
Original design v-tail quadcopter, all pieces 3D printed. 2213 935kv motors running 10.5 inch props with a 4400mah battery.
- 599
- 46

Mini-X Quadcopter Drone
Project by ken.do
Small, inexpensive, easy to fly, easy to mod, 250mm multipurpose quadcopter.
- 38
- 31

Pi0Plane
Project by Iker
A $150 smart fixed wing drone with the Pi Zero
- 127
- 82

The UnbreakaBLE Micro Drone
Project by Anshul Sanamvenkata
Use any Bluetooth 4.0(BLE) device to control this agile little modular drone.
- 3.1k
- 33

PCB Motor
Project by Carl Bugeja
A smaller and cheaper open source brushless motor
- 3.9k
- 610

PlutoX Rover
Project by siddharth.c
Using the sensors and controller of a drone , I created a rover to use the drone stability features on the ground.
- 57
- 41

Hover-Craft
Project by siddharth.c
I used the Primus X flight controller board to manoeuvre an extremely agile hover-craft frame I designed.
- 37
- 29

1
2
>
>|