Close

649 Results for "3D printing"

  • The Cree-board
  • Project     by Matt Deeds
  • Cree LEDs + keyboard = Cree-board Disappointed by the weak backlight in your keyboard? Fan of wordplay? This keyboard is for you
    • 5
    • 4

  • Square wave generator
  • Project     by Ringo2k
  • I found a 74HC294 programmable clock divider in my IC box. After reading the datasheet i liked to build a little box...
    • 1
    • 1

  • 3D modeling the scope
  • Log     from Internet of Things Microscope
  • *Update from Apollo on the 3D design and printing* I have designed the prototype base and pi mounts in Auto desk fusion 360. The picture below shows the part in Fusion 360 and in the slicer program Cura (3D Slicing Program). I have already printed a...

  • 3D Printed Sails
  • Log     from Ladon Project
  • Code for the big boat has been taking up most of my time, but in the mean time I've still been working on the sails for the little boat. The original sail design didn't work -- I couldn't get enough weight on to balance it against the overly long lever...

  • 3D Printing LED Diffusers
  • Log     from Not another D'Arsonval Movement clock
  • If you look at the photos of the face plate there are two holes for LEDs. One for power and one for AM indication. A while back I had made a pretty cool RGB LED color cube, using WS2812B LEDS. I had printed out a box on my homemade deltabot using clear...

  • Materials for big 3D prints
  • Log     from RigTig's Big 3D Printer
  • When I started this project long ago, I naively thought that I'd just collect together the many extruders I'd seen, including plastic filament, clay, concrete, and chocolate. Well, what works for 100mm to 200mm cubes (or thereabouts) is not always appropriate...

  • Barbaric Mouse
  • Hacker     in Arkansas US
  • I have been addicted to 3D modeling and printing since 2017. Every day and each new printer is a new learning experience. Saving for Bambu Labs X1-Carbon Combo.

  • Pannels 3d Prints to test for fit
  • Log     from HBKD-81
  • Looks like the 3d Test panels fit: So after waiting about 2 weeks to get the panels, they came and we have basically a working case!  I won't bore you with the back panel hack job I did getting the switch and the video port mounted, it's basically...

  • 3D Printed Case
  • Log     from Reagent Tracker
  • Design Considerations: The starting point of this project was the case, I wanted something that a bottle of FormLabs resin could sit on (about 100mm diameter), or be dropped into when not in use to act as both storage and measurement system. It had...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday