4000 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

Control a obsolete Holtek HT9290A/B DTMF dialer
Project by Mike G
Figure out how to reliably control a Holtek HT9290A or HT9290B "One-Key DTMF dialer" with a microcontroller, buspirate, etc.
- 2
- 1

Captain PIcar
Project by Derrick
2 wheeled rover for various robotics projects with high level logic implemented in LabVIEW running on a Raspberry Pi
- 253
- 2

LED Stand Lighting - Sound Reactive - ESP8266
Project by Ron O'Sullivan
Sender/Receiver LED Sound Reactive Light Stands ESP8266 Arduino (No longer using a SP107E)
- 2
- 1

Two Zone WiFi Water Timer
Project by nodemcu12ecanada
Moss or grass seed only requires many, very short watering cycles. Lawn water timers typically cannot do this. Control from a web page.
- 2
- 3

Aluminum Recycling Micro Factory
Project by hominidae
What if you could recycle your aluminum cans at home and could process a large volume of cans semi-autonomously?
- 27
- 25

4 Bit TTL CPU
Project by Tim
A TTL CPU I built a long time ago when I bought a huge stock of NOS TTL chips on ebay
- 14
- 17

Self Powered Automatic Relay (SPAR)
Project by Will Stone
A few hacks used to make an automatic switch for a dust control system.
- 7
- 11

[2016] Robotic Head
Project by Maximiliano Rojas
This is an old project of a robotic head that I built in the robotic laboratory of my university like 3 or 4 years ago.
- 2
- 1

[2016] Robotic hand + Leap Motion
Project by Maximiliano Rojas
This is an old project of a robotic hand that I built like 4 years ago, it is controlled with a leap motion interfaced through Processing.
- 2
- 3

Ch55xduino
Project by deqing
You can simply write code in Arduino IDE and hit one button to flash the ch55x chip to get code running.
- 20
- 22

Home Automation with NodeMCU
Project by nodemcu12ecanada
Modify your gas furnace thermostat and electric hot water heater controls and save $750+/year
- 1.2k
- 4

Xbox-ITX nondestructive mount + Case Mod
Project by paulmdemers
A mounting system to install a mini-itx PC inside an Xbox without modifying the case. And a modded case.
- 2
- 1

Control your audio with theKnob
Project by BrainHUB Lab
TheKnob - the sound volume control knob made of concrete, with RGB LED lights.
- 776
- 32

Octoshield
Project by GOODWIN
Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.
- 1.7k
- 15

IV Warming Pod- Field Ready
Project by John Loeffler
Using Cheap, Stackable, rechargable and Readily Available Components to warm IV Solutions.
- 11
- 13

|<
<
3
4
5
6
7
>
>|