Building a CP/M System Disk To avoid rewriting the assembler codes for ccp, bdos and cbios so that they can co-exist in the same file. I can append the i8hex files and remove the "end of file markers". To make the hex file more readable I have changed...
Quite symbolically, this Saturday, on March 2, Kyiv will host the first Maker Faire Kyiv in a long time! The last one was in 2018.Where, in addition to uECG and uMyo, we’ll present our first project in collaboration with TURFPTAx The device working...
Quite symbolically, this Saturday, on March 2, Kyiv will host the first Maker Faire Kyiv in a long time! The last one was in 2018. Where, in addition to uECG and uMyo, we’ll present our first project in collaboration with TURFPTAx The device working...
I was looking for a way to make the Excel Paper Model for the Z30 calculate the stepping points so it would be a complete model of the machine. The example shown below is for a rotor with a Ring Setting of 4, the 1 mark on the ring is set to the 4 position...
The trick with jackd is it can't start from any init or systemd scripts. It appeared to always shut down before initializing the dbus components or the audio driver. Delaying the script to 2 minutes after starting up still didn't start it....
An article recently published on MOONGIFT, a Japanese developer site, has showcased RasDash! The article is entirely in Japanese and Google Translate won't accept the URL as it has special characters but YANDEX does. Below are some links and a basic...
I have squeezed some simple instructions into a 16-byte ROM that writes 0x04 into the I/O address 0x00, and repeats (http://www.homebrew8088.com/):A: MOV AL, 04 OUT 00, AL JMP AThis is then converted into machine code (https://defuse.ca/online-x86-assembler.htm),...
Switching over to an ARM based solution is much better than an AVR+RTC chipset solution. Been looking at the STM32F030 chip and it is a perfect fit for this application! It has the following very desirable characteristics:32.768kHz oscillator on-chip....
This Blog will Cover How to build a cheap EC meter for your aquaponics/Hydroponics or water quality related projects. We are not going to get into what the ideal value of PPM or EC is, Just cover how to measure and quantify a fluid.We will be using this...
After a lot of testing with different lib and radio driver, together with @Florenc Caminade, we managed to capture and send ESP now packet! And it turns out to be quite simple, we just use linux sockets to send and receive packet. The tricky part was...
The first thing I did was try and find a device that could do what I wanted. I found this https://www.digikey.com/product-detail/en/maxlinear-inc/XR28V382IL32-0A-EB/1016-1974-ND/4515332 which should be exactly what I need. Its too much of a device for...
I've got the BIOS loading for Multi-boot Multicomp. It boots up to the Multi-boot prompt. > Available Commands: :ccxxxxiibbbbbb Load Intel-Hex file record Rxxxx Run from address xxxx Sddd System boot Iddd Init: Format directory Pddd[,xxxx] PutSys: write...
Fortunately most of the NASA documents are available. They can be found on-line at https://www.ibiblio.org/apollo/Documents/ The following documents are what I leaned heavily on in gaining an understanding of how this computer...
In preparation for the next logs I wanted to talk a bit about the pin compatibility between the Pro Trinket and the Pro Micro. The reason why I also want to integrate the Pro Micro is that it's more commonly available and cheaper.---------- more ----------The...