Close

402 Results for "%EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4%E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EB%8D%94%ED%82%B9%E2%81%B4 %E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EC%B4%88%EC%9B%90%EC%9D%98%EC%A7%91noise%EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4%EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5%EA%B0%95%EB%82%A8%EC%B4%88%EC%9B%90%EC%9D%98%EC%A7%91control %EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4 %E2%84%83%C3%9E%EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4contrived"

  • Software
  • Instructions     from Mike's Robot Dog
  • Making the dog walk is quite the challenge, so here's my approach. I created a drawing showing "standing" leg positions in black and progressive changes in red. The approach is to: 1) lift the left front and right rear legs 2) move the left front and...

  • Cabling the MPE device's hardware-components
  • Instructions     from MPE-DIY-Device
  • Power supply: Ground - GND from Teensy (power-rail as described in the PDF attached) +3.3V - 3.3V from Teensy (power-rail as described in the PDF attached) Joystick 1: VRx - Pin 23/A9 (horizontal control) VRy - Pin 22/A8 (vertical control) SW - Pin 01...

  • Address Bus
  • Instructions     from L-Star: Software-Defined 6502 Computer
  • This last step is going to get REALLY tedious because the Address Bus has so many lines. But this is the last step and you should be done, so keep it up just a little longer. A0: 6502 Pin 9 to FLiP pin 13 A1: 6502 Pin 10 to FLiP pin 14 A2: 6502...

  • Pedal Wiring
  • Instructions     from Pedalino™
  • Pedalino is designed to work with the majority of expression pedals on the market, but there are a few popular pedal types which are incompatible and need to use adapters in order to work with Pedalino. There is no recognized standard for footswitch...

  • Get a microSD card
  • Instructions     from TRS-80 Model 1 on a PIC32
  • get a 2 GB microSD, FAT formatted. (I think 2 GB is the max the driver will support; haven't tested with larger. Anyway, I suspect 2GB might be able to hold all the software ever written for the TRS-80, ever.  UPDATE:  it works with up to 32...

  • Step 10
  • Instructions     from DIY Decorative lamp | Home Decor Ideas
  •  Move camera under model and select Bottom Polygons with Right Mouse Button Then select Move Tool and set Y to 50 Select exactly the Foundation copy Then open Scale Tool and set X and Z to 80

  • Coil Gun
  • Instructions     from Coil Gun
  • Step 2- Making the capacitor chargerCamera flash circuitry and capacitors can also be used for this project, but since a large number of them are required, I found it easier to buy some high voltage capacitors and make a dedicated charger for them ;...

  • Sigma Derby Clone
  • Instructions     from Sigma Derby Clone
  • Program odds display)The board will receive the same 5 digit signal as the other boards, and break out the first two digits to print the odds.Left 5 odds display:#include int h45odds = 0; int h35odds = 0; int h34odds = 0; int h25odds = 0; int h24odds...

  • The Components
  • Instructions     from SMART MUSIC IN BEDROOM AND BATH WITH RASPBERRY PI
  • The required items for this system may vary, depending on how big you want your multiroom setup to be. Here, we will assume the basic setup using one set of speakers for each room. Based on the intended scope of your setup, you can add or remove as...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday